Mercurial > hg-public > lasercut-scripts / file diff

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/printrun-src/locale/nl/LC_MESSAGES/pronterface.po	Fri Jun 03 09:16:07 2016 +0200
@@ -0,0 +1,2254 @@
+# Pronterface Message Catalog Dutch
+# Copyright (C) 2011 Ruben Lubbes
+# Ruben Lubbes <ruben.lubbes@gmx.net>, 2011.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Pronterface rl1\n"
+"POT-Creation-Date: 2014-03-30 14:35+CEST\n"
+"PO-Revision-Date: 2011-09-06 16:31+0100\n"
+"Last-Translator: Ruben Lubbes <ruben.lubbes@gmx.net>\n"
+"Language-Team: NL <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+
+#: printrun/excluder.py:26
+msgid ""
+"Part excluder: draw rectangles where print instructions should be ignored"
+msgstr ""
+
+#: printrun/excluder.py:27 printrun/excluder.py:29
+msgid "Reset selection"
+msgstr ""
+
+#: printrun/gcodeplater.py:43 printrun/gcodeplater.py:44
+msgid "GCODE files (*.gcode;*.GCODE;*.g)"
+msgstr ""
+
+#: printrun/gcodeplater.py:112 printrun/gcodeplater.py:152
+msgid "Warning: no rotation support for now, object won't be correctly rotated"
+msgstr ""
+
+#: printrun/gcodeplater.py:141 printrun/gcodeplater.py:178
+msgid "Exported merged G-Codes to %s"
+msgstr ""
+
+#: printrun/gcview.py:352
+msgid "Fit to plate"
+msgstr ""
+
+#: printrun/gcview.py:353
+msgid "Fit to plate [F]"
+msgstr ""
+
+#: printrun/gui/__init__.py:19 printrun/pronterface.py:45
+msgid "WX is not installed. This program requires WX to run."
+msgstr "WX is niet geïnstalleerd. Dit programma vereist WX."
+
+#: printrun/gui/__init__.py:159
+#, fuzzy
+msgid "Commands"
+msgstr "Commando"
+
+#: printrun/gui/__init__.py:160
+msgid "Status"
+msgstr ""
+
+#: printrun/gui/controls.py:126
+#, fuzzy
+msgid "Heat:"
+msgstr "Element:"
+
+#: printrun/gui/controls.py:129
+msgid "Switch Hotend Off"
+msgstr ""
+
+#: printrun/gui/controls.py:129 printrun/gui/controls.py:149
+#: printrun/gui/toolbar.py:85
+msgid "Off"
+msgstr ""
+
+#: printrun/gui/controls.py:137
+msgid "Select Temperature for Hotend"
+msgstr ""
+
+#: printrun/gui/controls.py:141
+msgid "Switch Hotend On"
+msgstr ""
+
+#: printrun/gui/controls.py:141 printrun/gui/controls.py:161
+#: printrun/gui/controls.py:198
+msgid "Set"
+msgstr "Stel in"
+
+#: printrun/gui/controls.py:146 printrun/gui/controls.py:215
+msgid "Bed:"
+msgstr "Bed:"
+
+#: printrun/gui/controls.py:149
+msgid "Switch Heated Bed Off"
+msgstr ""
+
+#: printrun/gui/controls.py:157
+msgid "Select Temperature for Heated Bed"
+msgstr ""
+
+#: printrun/gui/controls.py:161
+msgid "Switch Heated Bed On"
+msgstr ""
+
+#: printrun/gui/controls.py:187
+msgid "Print speed:"
+msgstr ""
+
+#: printrun/gui/controls.py:192 printrun/gui/controls.py:207
+msgid "%d%%"
+msgstr ""
+
+#: printrun/gui/controls.py:198
+msgid "Set print speed factor"
+msgstr ""
+
+#: printrun/gui/controls.py:213
+msgid "Heater:"
+msgstr "Element:"
+
+#: printrun/gui/controls.py:265
+msgid "Length:"
+msgstr ""
+
+#: printrun/gui/controls.py:267
+msgid "mm"
+msgstr "mm"
+
+#: printrun/gui/controls.py:267
+msgid "mm @"
+msgstr ""
+
+#: printrun/gui/controls.py:269
+msgid "Amount to Extrude or Retract (mm)"
+msgstr ""
+
+#: printrun/gui/controls.py:272
+msgid "Extrude / Retract speed (mm/min)"
+msgstr ""
+
+#: printrun/gui/controls.py:278
+msgid "Speed:"
+msgstr ""
+
+#: printrun/gui/controls.py:279
+msgid ""
+"mm/\n"
+"min"
+msgstr ""
+
+#: printrun/gui/controls.py:290
+msgid "Tool:"
+msgstr ""
+
+#: printrun/gui/controls.py:293
+msgid "Click to switch current extruder"
+msgstr ""
+
+#: printrun/gui/controls.py:310
+msgid "Select current extruder"
+msgstr ""
+
+#: printrun/gui/controls.py:371
+msgid "Set Maximum Speed for X & Y axes (mm/min)"
+msgstr ""
+
+#: printrun/gui/controls.py:372
+msgid "XY:"
+msgstr "XY:"
+
+#: printrun/gui/controls.py:374
+#, fuzzy
+msgid "mm/min Z:"
+msgstr "mm/min"
+
+#: printrun/gui/controls.py:376
+msgid "Set Maximum Speed for Z axis (mm/min)"
+msgstr ""
+
+#: printrun/gui/graph.py:28
+msgid "Temperature graph"
+msgstr ""
+
+#: printrun/gui/log.py:32
+msgid ""
+"Send commands to printer\n"
+"(Type 'help' for simple\n"
+"help function)"
+msgstr ""
+
+#: printrun/gui/log.py:39
+msgid "Send"
+msgstr "Zend"
+
+#: printrun/gui/log.py:39
+#, fuzzy
+msgid "Send Command to Printer"
+msgstr "Printercommunicatie volgen"
+
+#: printrun/gui/toolbar.py:23
+msgid "Lock"
+msgstr ""
+
+#: printrun/gui/toolbar.py:25
+msgid "Lock graphical interface"
+msgstr ""
+
+#: printrun/gui/toolbar.py:32
+msgid ""
+"Communication Settings\n"
+"Click to rescan ports"
+msgstr ""
+
+#: printrun/gui/toolbar.py:32
+msgid "Port"
+msgstr "Poort"
+
+#: printrun/gui/toolbar.py:37
+msgid "Select Port Printer is connected to"
+msgstr ""
+
+#: printrun/gui/toolbar.py:46
+msgid "Select Baud rate for printer communication"
+msgstr ""
+
+#: printrun/gui/toolbar.py:55 printrun/pronterface.py:1052
+msgid "Connect"
+msgstr "Verbind"
+
+#: printrun/gui/toolbar.py:55 printrun/pronterface.py:1053
+msgid "Connect to the printer"
+msgstr "Verbind met printer"
+
+#: printrun/gui/toolbar.py:61
+msgid "Reset"
+msgstr "Reset"
+
+#: printrun/gui/toolbar.py:61
+#, fuzzy
+msgid "Reset the printer"
+msgstr "Verbind met printer"
+
+#: printrun/gui/toolbar.py:69
+#, fuzzy
+msgid "Load a 3D model file"
+msgstr "open bestand"
+
+#: printrun/gui/toolbar.py:69
+msgid "Load file"
+msgstr "open bestand"
+
+#: printrun/gui/toolbar.py:70
+msgid "SD"
+msgstr ""
+
+#: printrun/gui/toolbar.py:70
+#, fuzzy
+msgid "SD Card Printing"
+msgstr "Afdruk van SD"
+
+#: printrun/gui/toolbar.py:74
+msgid "Start Printing Loaded File"
+msgstr ""
+
+#: printrun/gui/toolbar.py:74 printrun/pronterface.py:1003
+#: printrun/pronterface.py:1062 printrun/pronterface.py:1078
+#: printrun/pronterface.py:1363 printrun/pronterface.py:1445
+msgid "Print"
+msgstr "Printen"
+
+#: printrun/gui/toolbar.py:80
+msgid "Pause Current Print"
+msgstr ""
+
+#: printrun/gui/toolbar.py:80 printrun/pronterface.py:1002
+#: printrun/pronterface.py:1061 printrun/pronterface.py:1081
+#: printrun/pronterface.py:1091 printrun/pronterface.py:1172
+#: printrun/pronterface.py:1364
+msgid "Pause"
+msgstr "Pauze"
+
+#: printrun/gui/toolbar.py:85
+msgid "Turn printer off"
+msgstr ""
+
+#: printrun/gui/viz.py:65
+msgid ""
+"Click to examine / edit\n"
+"  layers of loaded file"
+msgstr ""
+
+#: printrun/gui/widgets.py:36
+msgid "Find"
+msgstr ""
+
+#: printrun/gui/widgets.py:38
+msgid "Save"
+msgstr ""
+
+#: printrun/gui/widgets.py:43 printrun/objectplater.py:76
+#: printrun/pronterface.py:1257 printrun/pronterface.py:2017
+msgid "Cancel"
+msgstr "Annuleer"
+
+#: printrun/gui/widgets.py:70
+#, fuzzy
+msgid "Not Found!"
+msgstr "Bestand niet gevonden!"
+
+#: printrun/gui/widgets.py:124
+#, fuzzy
+msgid "Printer settings"
+msgstr "Wijzig instellingen"
+
+#: printrun/gui/widgets.py:125
+#, fuzzy
+msgid "User interface"
+msgstr "Printer Interface"
+
+#: printrun/gui/widgets.py:126
+#, fuzzy
+msgid "Colors"
+msgstr "Kleur"
+
+#: printrun/gui/widgets.py:127
+msgid "External commands"
+msgstr ""
+
+#: printrun/gui/widgets.py:132
+msgid "Edit settings"
+msgstr "Wijzig instellingen"
+
+#: printrun/gui/widgets.py:135
+#, fuzzy
+msgid "Settings"
+msgstr "&Instellingen"
+
+#: printrun/gui/widgets.py:187
+msgid "Custom button"
+msgstr "Gedefinieerde knop"
+
+#: printrun/gui/widgets.py:193
+msgid "Button title"
+msgstr "Knoptitel"
+
+#: printrun/gui/widgets.py:196
+msgid "Command"
+msgstr "Commando"
+
+#: printrun/gui/widgets.py:205
+msgid "Color"
+msgstr "Kleur"
+
+#: printrun/gviz.py:29
+msgid "Layer number and Z position show here when you scroll"
+msgstr ""
+
+#: printrun/gviz.py:39
+msgid "Zoom In [+]"
+msgstr ""
+
+#: printrun/gviz.py:40
+msgid "Zoom Out [-]"
+msgstr ""
+
+#: printrun/gviz.py:42
+msgid "Move Up a Layer [U]"
+msgstr ""
+
+#: printrun/gviz.py:43
+msgid "Move Down a Layer [D]"
+msgstr ""
+
+#: printrun/gviz.py:44
+#, fuzzy
+msgid "Reset view"
+msgstr "Reset"
+
+#: printrun/gviz.py:68
+msgid "Gcode view, shift to move view, mousewheel to set layer"
+msgstr ""
+
+#: printrun/gviz.py:105 printrun/gviz.py:241
+msgid "Layer %d - Going Up - Z = %.03f mm"
+msgstr ""
+
+#: printrun/gviz.py:250
+msgid "Layer %d - Going Down - Z = %.03f mm"
+msgstr ""
+
+#: printrun/objectplater.py:35
+msgid "Plate building tool"
+msgstr ""
+
+#: printrun/objectplater.py:45
+msgid "Clear"
+msgstr ""
+
+#: printrun/objectplater.py:49
+#, fuzzy
+msgid "Load"
+msgstr "Geladen "
+
+#: printrun/objectplater.py:53
+msgid "Snap to Z = 0"
+msgstr ""
+
+#: printrun/objectplater.py:57
+msgid "Put at center"
+msgstr ""
+
+#: printrun/objectplater.py:61
+msgid "Delete"
+msgstr ""
+
+#: printrun/objectplater.py:65
+msgid "Auto arrange"
+msgstr ""
+
+#: printrun/objectplater.py:69
+msgid "Export"
+msgstr ""
+
+#: printrun/objectplater.py:73
+msgid "Done"
+msgstr ""
+
+#: printrun/objectplater.py:151
+msgid "Autoplating"
+msgstr ""
+
+#: printrun/objectplater.py:199
+msgid "Bed full, sorry sir :("
+msgstr ""
+
+#: printrun/objectplater.py:209
+msgid ""
+"Are you sure you want to clear the grid? All unsaved changes will be lost."
+msgstr ""
+
+#: printrun/objectplater.py:210
+#, fuzzy
+msgid "Clear the grid?"
+msgstr " Sluit het venster"
+
+#: printrun/objectplater.py:256
+#, fuzzy
+msgid "Pick file to load"
+msgstr "Kies bestand op SD"
+
+#: printrun/objectplater.py:267
+#, fuzzy
+msgid "Pick file to save to"
+msgstr "Kies bestandsnaam op SD"
+
+#: printrun/plater.py:212
+msgid "STL files (*.stl;*.STL)|*.stl;*.STL|OpenSCAD files (*.scad)|*.scad"
+msgstr ""
+
+#: printrun/plater.py:213
+msgid "STL files (*.stl;*.STL)|*.stl;*.STL"
+msgstr ""
+
+#: printrun/plater.py:244
+#, fuzzy
+msgid "Loading STL file failed"
+msgstr "Bestand openen mislukt"
+
+#: printrun/plater.py:244 printrun/plater.py:251
+msgid "Error"
+msgstr ""
+
+#: printrun/plater.py:251
+#, fuzzy
+msgid "Loading OpenSCAD file failed"
+msgstr "Bestand openen mislukt"
+
+#: printrun/plater.py:284
+msgid "Couldn't load non-existing file %s"
+msgstr ""
+
+#: printrun/plater.py:360
+msgid "Wrote plate to %s"
+msgstr ""
+
+#: printrun/plater.py:367
+msgid ""
+"Failed to use simarrange for plating, falling back to the standard method"
+msgstr ""
+
+#: printrun/plater.py:372
+msgid "Autoplating using simarrange"
+msgstr ""
+
+#: printrun/plater.py:387
+msgid "Plate full, please remove some objects"
+msgstr ""
+
+#: printrun/plater.py:404
+msgid "simarrange failed"
+msgstr ""
+
+#: printrun/printcore.py:177
+msgid "Could not connect to %s:%s:"
+msgstr ""
+
+#: printrun/printcore.py:178
+msgid "Socket error %s:"
+msgstr ""
+
+#: printrun/printcore.py:191 printrun/printcore.py:196
+msgid "Could not connect to %s at baudrate %s:"
+msgstr ""
+
+#: printrun/printcore.py:192
+msgid "Serial error: %s"
+msgstr ""
+
+#: printrun/printcore.py:197
+msgid "IO error: %s"
+msgstr ""
+
+#: printrun/printcore.py:231
+msgid "Can't read from printer (disconnected?) (SelectError {0}): {1}"
+msgstr ""
+
+#: printrun/printcore.py:234
+msgid "SelectError ({0}): {1}"
+msgstr ""
+
+#: printrun/printcore.py:237
+msgid "Can't read from printer (disconnected?) (SerialException): {0}"
+msgstr ""
+
+#: printrun/printcore.py:240
+msgid "Can't read from printer (disconnected?) (Socket error {0}): {1}"
+msgstr ""
+
+#: printrun/printcore.py:245
+msgid "Can't read from printer (disconnected?) (OS Error {0}): {1}"
+msgstr ""
+
+#: printrun/printcore.py:259
+msgid "Aborting connection attempt after 4 failed writes."
+msgstr ""
+
+#: printrun/printcore.py:462 printrun/printcore.py:470
+#: printrun/pronsole.py:1192 printrun/pronsole.py:1250
+#: printrun/pronterface.py:209 printrun/pronterface.py:962
+#: printrun/pronterface.py:1111 printrun/pronterface.py:1178
+msgid "Not connected to printer."
+msgstr "Printer is niet verbonden."
+
+#: printrun/printcore.py:479
+msgid "Print start callback failed with:"
+msgstr ""
+
+#: printrun/printcore.py:490
+msgid "Print end callback failed with:"
+msgstr ""
+
+#: printrun/printcore.py:493
+msgid "Print thread died due to the following error:"
+msgstr ""
+
+#: printrun/printcore.py:584
+msgid "Could not analyze command %s:"
+msgstr ""
+
+#: printrun/printcore.py:601
+msgid "Can't write to printer (disconnected ?):"
+msgstr ""
+
+#: printrun/printcore.py:604
+msgid "Can't write to printer (disconnected?) (Socket error {0}): {1}"
+msgstr ""
+
+#: printrun/printcore.py:607
+msgid "Can't write to printer (disconnected?) (SerialException): {0}"
+msgstr ""
+
+#: printrun/printcore.py:610
+msgid "Socket connection broken, disconnected. ({0}): {1}"
+msgstr ""
+
+#: printrun/pronsole.py:72
+#, fuzzy
+msgid "Default: "
+msgstr "Standaardinstelling"
+
+#: printrun/pronsole.py:73
+msgid "(Control-doubleclick to reset to default value)"
+msgstr ""
+
+#: printrun/pronsole.py:108
+#, fuzzy
+msgid ""
+"Are you sure you want to reset the setting to the default value: {0!r} ?"
+msgstr "Weet je zeker dat je de printer wilt resetten?"
+
+#: printrun/pronsole.py:108
+msgid "Confirm set default"
+msgstr ""
+
+#: printrun/pronsole.py:258
+msgid "Width"
+msgstr ""
+
+#: printrun/pronsole.py:261
+msgid "Depth"
+msgstr ""
+
+#: printrun/pronsole.py:264
+msgid "Height"
+msgstr ""
+
+#: printrun/pronsole.py:267
+msgid "X offset"
+msgstr ""
+
+#: printrun/pronsole.py:270
+msgid "Y offset"
+msgstr ""
+
+#: printrun/pronsole.py:273
+msgid "Z offset"
+msgstr ""
+
+#: printrun/pronsole.py:276
+msgid "X home pos."
+msgstr ""
+
+#: printrun/pronsole.py:279
+msgid "Y home pos."
+msgstr ""
+
+#: printrun/pronsole.py:282
+msgid "Z home pos."
+msgstr ""
+
+#: printrun/pronsole.py:301
+#, fuzzy
+msgid "Port used to communicate with printer"
+msgstr "Printer is niet verbonden."
+
+#: printrun/pronsole.py:301
+msgid "Serial port"
+msgstr ""
+
+#: printrun/pronsole.py:302
+msgid "Baud rate"
+msgstr ""
+
+#: printrun/pronsole.py:302
+msgid "Communications Speed"
+msgstr ""
+
+#: printrun/pronsole.py:303
+msgid "TCP streaming mode"
+msgstr ""
+
+#: printrun/pronsole.py:303
+msgid ""
+"When using a TCP connection to the printer, the streaming mode will not wait "
+"for acks from the printer to send new commands. This will break things such "
+"as ETA prediction, but can result in smoother prints."
+msgstr ""
+
+#: printrun/pronsole.py:304
+msgid "Bed temperature for ABS"
+msgstr ""
+
+#: printrun/pronsole.py:304
+msgid "Heated Build Platform temp for ABS (deg C)"
+msgstr ""
+
+#: printrun/pronsole.py:305
+msgid "Bed temperature for PLA"
+msgstr ""
+
+#: printrun/pronsole.py:305
+msgid "Heated Build Platform temp for PLA (deg C)"
+msgstr ""
+
+#: printrun/pronsole.py:306
+msgid "Extruder temp for ABS (deg C)"
+msgstr ""
+
+#: printrun/pronsole.py:306
+msgid "Extruder temperature for ABS"
+msgstr ""
+
+#: printrun/pronsole.py:307
+msgid "Extruder temp for PLA (deg C)"
+msgstr ""
+
+#: printrun/pronsole.py:307
+msgid "Extruder temperature for PLA"
+msgstr ""
+
+#: printrun/pronsole.py:308
+msgid "Feedrate for Control Panel Moves in X and Y (mm/min)"
+msgstr ""
+
+#: printrun/pronsole.py:308
+msgid "X && Y manual feedrate"
+msgstr ""
+
+#: printrun/pronsole.py:309
+msgid "Feedrate for Control Panel Moves in Z (mm/min)"
+msgstr ""
+
+#: printrun/pronsole.py:309
+msgid "Z manual feedrate"
+msgstr ""
+
+#: printrun/pronsole.py:310
+msgid "E manual feedrate"
+msgstr ""
+
+#: printrun/pronsole.py:310
+msgid "Feedrate for Control Panel Moves in Extrusions (mm/min)"
+msgstr ""
+
+#: printrun/pronsole.py:311
+#, fuzzy
+msgid "Slice command"
+msgstr "Commando"
+
+#: printrun/pronsole.py:312
+#, fuzzy
+msgid "Slice settings command"
+msgstr "SFACT Instellingen"
+
+#: printrun/pronsole.py:312
+msgid "Slicer options command"
+msgstr ""
+
+#: printrun/pronsole.py:313
+msgid "Executable to run when the print is finished"
+msgstr ""
+
+#: printrun/pronsole.py:313
+#, fuzzy
+msgid "Final command"
+msgstr "Commando"
+
+#: printrun/pronsole.py:314
+#, fuzzy
+msgid "Error command"
+msgstr "Commando"
+
+#: printrun/pronsole.py:314
+msgid "Executable to run when an error occurs"
+msgstr ""
+
+#: printrun/pronsole.py:381
+msgid "Failed to run callback after setting \"%s\":"
+msgstr ""
+
+#: printrun/pronsole.py:469
+msgid "Build dimensions"
+msgstr ""
+
+#: printrun/pronsole.py:469
+msgid ""
+"Dimensions of Build Platform\n"
+" & optional offset of origin\n"
+" & optional switch position\n"
+"\n"
+"Examples:\n"
+"   XXXxYYY\n"
+"   XXX,YYY,ZZZ\n"
+"   XXXxYYYxZZZ+OffX+OffY+OffZ\n"
+"XXXxYYYxZZZ+OffX+OffY+OffZ+HomeX+HomeY+HomeZ"
+msgstr ""
+
+#: printrun/pronsole.py:495
+msgid ""
+"Welcome to the printer console! Type \"help\" for a list of available "
+"commands."
+msgstr ""
+
+#: printrun/pronsole.py:657 printrun/pronsole.py:665 printrun/pronsole.py:673
+#: printrun/pronsole.py:1519 printrun/pronsole.py:1546
+#: printrun/pronsole.py:1618 printrun/pronterface.py:357
+#: printrun/pronterface.py:377 printrun/pronterface.py:394
+msgid "Printer is not online."
+msgstr "Printer is niet verbonden."
+
+#: printrun/pronsole.py:692
+msgid "Exiting program. Goodbye!"
+msgstr ""
+
+#: printrun/pronsole.py:697
+msgid "Disconnects from the printer and exits the program."
+msgstr ""
+
+#: printrun/pronsole.py:974
+msgid ""
+"load this file on startup instead of .pronsolerc ; you may chain config "
+"files, if so settings auto-save will use the last specified file"
+msgstr ""
+
+#: printrun/pronsole.py:975
+msgid ""
+"executes command after configuration/.pronsolerc is loaded ; macros/settings "
+"from these commands are not autosaved"
+msgstr ""
+
+#: printrun/pronsole.py:976
+msgid "file to load"
+msgstr ""
+
+#: printrun/pronsole.py:1104
+#, fuzzy
+msgid "Loaded %s, %d lines."
+msgstr "Geladen %s, %d regels"
+
+#: printrun/pronsole.py:1105 printrun/pronterface.py:1381
+msgid "Estimated duration: %d layers, %s"
+msgstr ""
+
+#: printrun/pronsole.py:1134
+msgid "No file name given."
+msgstr ""
+
+#: printrun/pronsole.py:1140
+msgid "Skeining file: %s"
+msgstr ""
+
+#: printrun/pronsole.py:1142 printrun/pronterface.py:1305
+msgid "File not found!"
+msgstr "Bestand niet gevonden!"
+
+#: printrun/pronsole.py:1147
+msgid "Entering slicer settings: %s"
+msgstr ""
+
+#: printrun/pronsole.py:1151
+#, fuzzy
+msgid "Slicing: "
+msgstr "Skeinforge draait"
+
+#: printrun/pronsole.py:1158
+#, fuzzy
+msgid "Loading sliced file."
+msgstr "open bestand"
+
+#: printrun/pronsole.py:1161
+#, fuzzy
+msgid "Slicing failed: %s"
+msgstr "Skeinforge draait"
+
+#: printrun/pronsole.py:1174
+msgid ""
+"Creates a gcode file from an stl model using the slicer (with tab-completion)"
+msgstr ""
+
+#: printrun/pronsole.py:1175
+msgid "slice filename.stl - create gcode file"
+msgstr ""
+
+#: printrun/pronsole.py:1176
+msgid ""
+"slice filename.stl view - create gcode file and view using skeiniso (if "
+"using skeinforge)"
+msgstr ""
+
+#: printrun/pronsole.py:1177
+#, fuzzy
+msgid "slice set - adjust slicer settings"
+msgstr "Instellen SFACT"
+
+#: printrun/pronsole.py:1189
+msgid "Please enter target name in 8.3 format."
+msgstr ""
+
+#: printrun/pronsole.py:1195
+msgid "Uploading as %s"
+msgstr ""
+
+#: printrun/pronsole.py:1196
+msgid "Uploading %s"
+msgstr ""
+
+#: printrun/pronsole.py:1198
+msgid "Press Ctrl-C to interrupt upload."
+msgstr ""
+
+#: printrun/pronsole.py:1201
+msgid "Progress: "
+msgstr ""
+
+#: printrun/pronsole.py:1212
+msgid "Upload completed. %s should now be on the card."
+msgstr ""
+
+#: printrun/pronsole.py:1216
+msgid "...interrupted!"
+msgstr ""
+
+#: printrun/pronsole.py:1218
+msgid "Something wrong happened while uploading:"
+msgstr ""
+
+#: printrun/pronsole.py:1224
+msgid "A partial file named %s may have been written to the sd card."
+msgstr ""
+
+#: printrun/pronsole.py:1241
+msgid ""
+"Send a loaded gcode file to the printer. Load a file with the load command "
+"first."
+msgstr ""
+
+#: printrun/pronsole.py:1243
+msgid "Send a loaded gcode file to the printer. You have %s loaded right now."
+msgstr ""
+
+#: printrun/pronsole.py:1247 printrun/pronterface.py:730
+#: printrun/pronterface.py:1108
+msgid "No file loaded. Please use load first."
+msgstr "Geen bestand geladen. Eerst bestand inladen."
+
+#: printrun/pronsole.py:1252
+#, fuzzy
+msgid "Printing %s"
+msgstr " Printen:%04.2f %% |"
+
+#: printrun/pronsole.py:1253
+msgid "You can monitor the print with the monitor command."
+msgstr ""
+
+#: printrun/pronsole.py:1261
+msgid "Not printing, cannot pause."
+msgstr ""
+
+#: printrun/pronsole.py:1267
+#, fuzzy
+msgid "Pauses a running print"
+msgstr "Start het printen"
+
+#: printrun/pronsole.py:1274
+msgid "Not paused, unable to resume. Start a print first."
+msgstr ""
+
+#: printrun/pronsole.py:1284
+msgid "Resumes a paused print."
+msgstr ""
+
+#: printrun/pronsole.py:1293
+msgid "Files on SD card:"
+msgstr ""
+
+#: printrun/pronsole.py:1307 printrun/pronsole.py:1349
+#: printrun/pronsole.py:1562
+#, fuzzy
+msgid "Printer is not online. Please connect to it first."
+msgstr "Printer is niet verbonden."
+
+#: printrun/pronsole.py:1312
+msgid "Lists files on the SD card"
+msgstr ""
+
+#: printrun/pronsole.py:1316 printrun/pronterface.py:1645
+msgid "Opening file failed."
+msgstr "Bestand openen mislukt"
+
+#: printrun/pronsole.py:1322 printrun/pronterface.py:1651
+msgid "Starting print"
+msgstr "Start het printen"
+
+#: printrun/pronsole.py:1345
+#, fuzzy
+msgid "Resets the printer."
+msgstr "Verbind met printer"
+
+#: printrun/pronsole.py:1355
+#, fuzzy
+msgid "File is not present on card. Please upload it first."
+msgstr "Geen bestand geladen. Eerst bestand inladen."
+
+#: printrun/pronsole.py:1359
+msgid "Printing file: %s from SD card."
+msgstr ""
+
+#: printrun/pronsole.py:1360
+msgid "Requesting SD print..."
+msgstr ""
+
+#: printrun/pronsole.py:1364
+msgid "Print a file from the SD card. Tab completes with available file names."
+msgstr ""
+
+#: printrun/pronsole.py:1365
+msgid "sdprint filename.g"
+msgstr ""
+
+#: printrun/pronsole.py:1382
+msgid "Print resumed at: %s"
+msgstr ""
+
+#: printrun/pronsole.py:1384
+msgid "Print started at: %s"
+msgstr ""
+
+#: printrun/pronsole.py:1392
+msgid "Failed to inhibit sleep:"
+msgstr ""
+
+#: printrun/pronsole.py:1399
+msgid "Failed to uninhibit sleep:"
+msgstr ""
+
+#: printrun/pronsole.py:1403
+msgid "Print ended at: %(end_time)s and took %(duration)s"
+msgstr ""
+
+#: printrun/pronsole.py:1457
+msgid "Printer is not currently printing. No ETA available."
+msgstr ""
+
+#: printrun/pronsole.py:1460
+msgid "Est: %s of %s remaining"
+msgstr ""
+
+#: printrun/pronsole.py:1465
+msgid "Displays estimated remaining print time."
+msgstr ""
+
+#: printrun/pronsole.py:1498
+#, fuzzy
+msgid "Read the extruder and bed temperature."
+msgstr "Er moet een temperatuur worden ingesteld."
+
+#: printrun/pronsole.py:1507 printrun/pronsole.py:1540
+msgid "You must enter a temperature."
+msgstr "Er moet een temperatuur worden ingesteld."
+
+#: printrun/pronsole.py:1512
+msgid ""
+"%s is a high temperature to set your extruder to. Are you sure you want to "
+"do that?"
+msgstr ""
+
+#: printrun/pronsole.py:1517
+#, fuzzy
+msgid "Setting hotend temperature to %s degrees Celsius."
+msgstr "Stel elementtemperatuur in op %f graden Celsius."
+
+#: printrun/pronsole.py:1521 printrun/pronterface.py:359
+msgid ""
+"You cannot set negative temperatures. To turn the hotend off entirely, set "
+"its temperature to 0."
+msgstr ""
+"Negatieve temperatuur is niet instelbaar. Om het element uit te schakelen "
+"wordt temperatuur 0 ingesteld."
+
+#: printrun/pronsole.py:1524
+#, fuzzy
+msgid "Sets the hotend temperature to the value entered."
+msgstr "Stel elementtemperatuur in op %f graden Celsius."
+
+#: printrun/pronsole.py:1525 printrun/pronsole.py:1552
+msgid "Enter either a temperature in celsius or one of the following keywords"
+msgstr ""
+
+#: printrun/pronsole.py:1544
+#, fuzzy
+msgid "Setting bed temperature to %s degrees Celsius."
+msgstr "Bed teperatuur ingesteld op %f graden Celsius."
+
+#: printrun/pronsole.py:1548 printrun/pronterface.py:379
+msgid ""
+"You cannot set negative temperatures. To turn the bed off entirely, set its "
+"temperature to 0."
+msgstr ""
+"Negatieve temperatuur is niet instelbaar. Om het printbed uit te schakelen "
+"wordt temperatuur 0 ingesteld."
+
+#: printrun/pronsole.py:1551
+#, fuzzy
+msgid "Sets the bed temperature to the value entered."
+msgstr "Bed teperatuur ingesteld op %f graden Celsius."
+
+#: printrun/pronsole.py:1565
+msgid "Printer is not printing. Please print something before monitoring."
+msgstr ""
+
+#: printrun/pronsole.py:1567
+#, fuzzy
+msgid "Monitoring printer, use ^C to interrupt."
+msgstr "Printercommunicatie wordt gevolgd."
+
+#: printrun/pronsole.py:1572 printrun/pronterface.py:329
+msgid "Invalid period given."
+msgstr "Foute gegevens ingevoerd"
+
+#: printrun/pronsole.py:1573
+msgid "Updating values every %f seconds."
+msgstr ""
+
+#: printrun/pronsole.py:1584 printrun/pronsole.py:1587
+msgid "Print progress: "
+msgstr ""
+
+#: printrun/pronsole.py:1595 printrun/pronterface.py:333
+msgid "Done monitoring."
+msgstr "Klaar met volgen."
+
+#: printrun/pronsole.py:1599
+msgid "Monitor a machine's temperatures and an SD print's status."
+msgstr ""
+
+#: printrun/pronsole.py:1600
+msgid ""
+"monitor - Reports temperature and SD print status (if SD printing) every 5 "
+"seconds"
+msgstr ""
+
+#: printrun/pronsole.py:1601
+msgid ""
+"monitor 2 - Reports temperature and SD print status (if SD printing) every 2 "
+"seconds"
+msgstr ""
+
+#: printrun/pronsole.py:1612
+msgid "You must specify the tool index as an integer."
+msgstr ""
+
+#: printrun/pronsole.py:1616
+msgid "Using tool %d."
+msgstr ""
+
+#: printrun/pronsole.py:1620
+msgid "You cannot set negative tool numbers."
+msgstr ""
+
+#: printrun/pronsole.py:1623
+msgid ""
+"Switches to the specified tool (e.g. doing tool 1 will emit a T1 G-Code)."
+msgstr ""
+
+#: printrun/pronsole.py:1627
+msgid "No move specified."
+msgstr ""
+
+#: printrun/pronsole.py:1630 printrun/pronsole.py:1692
+#: printrun/pronsole.py:1735 printrun/pronsole.py:1762
+msgid ""
+"Printer is currently printing. Please pause the print before you issue "
+"manual commands."
+msgstr ""
+
+#: printrun/pronsole.py:1633 printrun/pronsole.py:1759
+#, fuzzy
+msgid "Printer is not online. Unable to move."
+msgstr "Printer is niet verbonden."
+
+#: printrun/pronsole.py:1649
+msgid "Unknown axis."
+msgstr ""
+
+#: printrun/pronsole.py:1654
+msgid "Invalid distance"
+msgstr ""
+
+#: printrun/pronsole.py:1665
+msgid "Move an axis. Specify the name of the axis and the amount. "
+msgstr ""
+
+#: printrun/pronsole.py:1666
+msgid ""
+"move X 10 will move the X axis forward by 10mm at %s mm/min (default XY "
+"speed)"
+msgstr ""
+
+#: printrun/pronsole.py:1667
+msgid "move Y 10 5000 will move the Y axis forward by 10mm at 5000mm/min"
+msgstr ""
+
+#: printrun/pronsole.py:1668
+msgid ""
+"move Z -1 will move the Z axis down by 1mm at %s mm/min (default Z speed)"
+msgstr ""
+
+#: printrun/pronsole.py:1669
+msgid "Common amounts are in the tabcomplete list."
+msgstr ""
+
+#: printrun/pronsole.py:1699 printrun/pronsole.py:1742
+#, fuzzy
+msgid "Invalid length given."
+msgstr "Foute gegevens ingevoerd"
+
+#: printrun/pronsole.py:1704 printrun/pronsole.py:1747
+#, fuzzy
+msgid "Invalid speed given."
+msgstr "Foute gegevens ingevoerd"
+
+#: printrun/pronsole.py:1712
+msgid "Extruding %fmm of filament."
+msgstr ""
+
+#: printrun/pronsole.py:1714
+msgid "Reversing %fmm of filament."
+msgstr ""
+
+#: printrun/pronsole.py:1716
+msgid "Length is 0, not doing anything."
+msgstr ""
+
+#: printrun/pronsole.py:1722
+msgid ""
+"Extrudes a length of filament, 5mm by default, or the number of mm given as "
+"a parameter"
+msgstr ""
+
+#: printrun/pronsole.py:1723
+msgid "extrude - extrudes 5mm of filament at 300mm/min (5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1724
+msgid "extrude 20 - extrudes 20mm of filament at 300mm/min (5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1725
+msgid "extrude -5 - REVERSES 5mm of filament at 300mm/min (5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1726
+msgid "extrude 10 210 - extrudes 10mm of filament at 210mm/min (3.5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1732
+#, fuzzy
+msgid "Printer is not online. Unable to reverse."
+msgstr "Printer is niet verbonden."
+
+#: printrun/pronsole.py:1751
+msgid ""
+"Reverses the extruder, 5mm by default, or the number of mm given as a "
+"parameter"
+msgstr ""
+
+#: printrun/pronsole.py:1752
+msgid "reverse - reverses 5mm of filament at 300mm/min (5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1753
+msgid "reverse 20 - reverses 20mm of filament at 300mm/min (5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1754
+msgid "reverse 10 210 - extrudes 10mm of filament at 210mm/min (3.5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1755
+msgid "reverse -5 - EXTRUDES 5mm of filament at 300mm/min (5mm/s)"
+msgstr ""
+
+#: printrun/pronsole.py:1777
+#, fuzzy
+msgid "Homes the printer"
+msgstr "Verbind met printer"
+
+#: printrun/pronsole.py:1778
+msgid "home - homes all axes and zeroes the extruder(Using G28 and G92)"
+msgstr ""
+
+#: printrun/pronsole.py:1779
+msgid "home xy - homes x and y axes (Using G28)"
+msgstr ""
+
+#: printrun/pronsole.py:1780
+msgid "home z - homes z axis only (Using G28)"
+msgstr ""
+
+#: printrun/pronsole.py:1781
+msgid "home e - set extruder position to zero (Using G92)"
+msgstr ""
+
+#: printrun/pronsole.py:1782
+msgid "home xyze - homes all axes and zeroes the extruder (Using G28 and G92)"
+msgstr ""
+
+#: printrun/pronsole.py:1790
+#, fuzzy
+msgid "; Motors off"
+msgstr "Motoren uit"
+
+#: printrun/pronsole.py:1792
+#, fuzzy
+msgid "; Extruder off"
+msgstr "Extruden"
+
+#: printrun/pronsole.py:1794
+msgid "; Heatbed off"
+msgstr ""
+
+#: printrun/pronsole.py:1796
+msgid "; Fan off"
+msgstr ""
+
+#: printrun/pronsole.py:1798
+msgid "; Power supply off"
+msgstr ""
+
+#: printrun/pronsole.py:1801
+#, fuzzy
+msgid "Printer is not online. Unable to turn it off."
+msgstr "Printer is niet verbonden."
+
+#: printrun/pronsole.py:1804
+msgid "Turns off everything on the printer"
+msgstr ""
+
+#: printrun/pronsole.py:1815
+msgid "G-Code calling host command \"%s\""
+msgstr ""
+
+#: printrun/pronsole.py:1824
+msgid ""
+"Runs a custom script. Current gcode filename can be given using %s token."
+msgstr ""
+
+#: printrun/pronsole.py:1832
+msgid ""
+"Runs a custom script which output gcode which will in turn be executed. "
+"Current gcode filename can be given using %s token."
+msgstr ""
+
+#: printrun/pronterface.py:149
+msgid "Motors off"
+msgstr "Motoren uit"
+
+#: printrun/pronterface.py:149
+msgid "Switch all motors off"
+msgstr ""
+
+#: printrun/pronterface.py:150
+msgid "Advance extruder by set length"
+msgstr ""
+
+#: printrun/pronterface.py:150
+msgid "Extrude"
+msgstr "Extruden"
+
+#: printrun/pronterface.py:151
+msgid "Reverse"
+msgstr "Terug"
+
+#: printrun/pronterface.py:151
+msgid "Reverse extruder by set length"
+msgstr ""
+
+#: printrun/pronterface.py:165
+#, fuzzy
+msgid "Pronterface"
+msgstr "Printer Interface"
+
+#: printrun/pronterface.py:192
+msgid ""
+"# I moved all your custom buttons into .pronsolerc.\n"
+"# Please don't add them here any more.\n"
+"# Backup of your old buttons is in custombtn.old\n"
+msgstr ""
+"# Gedefinieerde knoppen zijn verplaatst naar .pronsolerc.\n"
+"# Hier geen nieuwe knoppen definiëren.\n"
+"# Een backup van de oude knoppen staat in custombtn.old\n"
+
+#: printrun/pronterface.py:197
+msgid ""
+"Note!!! You have specified custom buttons in both custombtn.txt and ."
+"pronsolerc"
+msgstr ""
+"Let op!!! Er zijn gedefinieerde knoppen in zowel custombtn.txt en .pronsolerc"
+
+#: printrun/pronterface.py:198
+msgid ""
+"Ignoring custombtn.txt. Remove all current buttons to revert to custombtn.txt"
+msgstr ""
+"Negeer custombtn.txt. Verwijder alle gedefinieerde knoppen om gebruik te "
+"maken van custombtn.txt"
+
+#: printrun/pronterface.py:331
+msgid "Monitoring printer."
+msgstr "Printercommunicatie wordt gevolgd."
+
+#: printrun/pronterface.py:354
+msgid "Setting hotend temperature to %f degrees Celsius."
+msgstr "Stel elementtemperatuur in op %f graden Celsius."
+
+#: printrun/pronterface.py:361 printrun/pronterface.py:381
+msgid "You must enter a temperature. (%s)"
+msgstr "Er moet een temperatuur worden ingesteld. (%s)"
+
+#: printrun/pronterface.py:374
+msgid "Setting bed temperature to %f degrees Celsius."
+msgstr "Bed teperatuur ingesteld op %f graden Celsius."
+
+#: printrun/pronterface.py:392
+msgid "Setting print speed factor to %d%%."
+msgstr ""
+
+#: printrun/pronterface.py:396
+#, fuzzy
+msgid "You must enter a speed. (%s)"
+msgstr "Er moet een temperatuur worden ingesteld. (%s)"
+
+#: printrun/pronterface.py:470
+msgid "Plate function activated"
+msgstr ""
+
+#: printrun/pronterface.py:479
+msgid "G-Code plate function activated"
+msgstr ""
+
+#: printrun/pronterface.py:486
+msgid "Plated %s"
+msgstr ""
+
+#: printrun/pronterface.py:500
+msgid "SD Upload"
+msgstr "uploaden naar SD"
+
+#: printrun/pronterface.py:504
+msgid "SD Print"
+msgstr "Afdruk van SD"
+
+#: printrun/pronterface.py:565
+msgid ""
+"Manual move outside of the build volume prevented (see the \"Clamp manual "
+"moves\" option)."
+msgstr ""
+
+#: printrun/pronterface.py:621
+msgid ""
+"Attempted to write invalid text to console, which could be due to an invalid "
+"baudrate"
+msgstr ""
+
+#: printrun/pronterface.py:655
+msgid " Opens file"
+msgstr " Opent bestand"
+
+#: printrun/pronterface.py:655
+msgid "&Open..."
+msgstr "&Open..."
+
+#: printrun/pronterface.py:663
+msgid " Clear output console"
+msgstr ""
+
+#: printrun/pronterface.py:663
+msgid "Clear console"
+msgstr ""
+
+#: printrun/pronterface.py:664
+msgid " Closes the Window"
+msgstr " Sluit het venster"
+
+#: printrun/pronterface.py:664
+msgid "E&xit"
+msgstr "&Stoppen"
+
+#: printrun/pronterface.py:665
+msgid "&File"
+msgstr ""
+
+#: printrun/pronterface.py:668
+msgid " Edit open file"
+msgstr " Wijzig geopend bestand"
+
+#: printrun/pronterface.py:668
+msgid "&Edit..."
+msgstr "&Wijzig..."
+
+#: printrun/pronterface.py:669
+msgid " Compose 3D models into a single plate"
+msgstr ""
+
+#: printrun/pronterface.py:669
+#, fuzzy
+msgid "Plater"
+msgstr "Element:"
+
+#: printrun/pronterface.py:670
+msgid " Compose G-Codes into a single plate"
+msgstr ""
+
+#: printrun/pronterface.py:670
+msgid "G-Code Plater"
+msgstr ""
+
+#: printrun/pronterface.py:671
+msgid " Exclude parts of the bed from being printed"
+msgstr ""
+
+#: printrun/pronterface.py:671
+msgid "Excluder"
+msgstr ""
+
+#: printrun/pronterface.py:672
+msgid " Project slices"
+msgstr ""
+
+#: printrun/pronterface.py:672
+msgid "Projector"
+msgstr ""
+
+#: printrun/pronterface.py:673
+msgid "&Tools"
+msgstr ""
+
+#: printrun/pronterface.py:676
+msgid ""
+" Recover previous print after a disconnect (homes X, Y, restores Z and E "
+"status)"
+msgstr ""
+
+#: printrun/pronterface.py:676
+msgid "Recover"
+msgstr ""
+
+#: printrun/pronterface.py:679
+msgid "&Advanced"
+msgstr ""
+
+#: printrun/pronterface.py:686
+#, fuzzy
+msgid "Print &settings"
+msgstr "Wijzig instellingen"
+
+#: printrun/pronterface.py:687
+msgid "&Filament"
+msgstr ""
+
+#: printrun/pronterface.py:688
+#, fuzzy
+msgid "&Printer"
+msgstr "&Printen"
+
+#: printrun/pronterface.py:694
+msgid "&Slic3r"
+msgstr ""
+
+#: printrun/pronterface.py:696
+msgid "Failed to load Slic3r configuration:"
+msgstr ""
+
+#: printrun/pronterface.py:702
+msgid "&Macros"
+msgstr "&Macros"
+
+#: printrun/pronterface.py:703
+msgid "<&New...>"
+msgstr "<&Nieuw...>"
+
+#: printrun/pronterface.py:704
+msgid " Options dialog"
+msgstr "Optievenster"
+
+#: printrun/pronterface.py:704
+msgid "&Options"
+msgstr "&Opties"
+
+#: printrun/pronterface.py:706
+#, fuzzy
+msgid " Adjust slicing settings"
+msgstr "Instellen SFACT"
+
+#: printrun/pronterface.py:706
+#, fuzzy
+msgid "Slicing settings"
+msgstr "SFACT Instellingen"
+
+#: printrun/pronterface.py:708
+msgid "Debug communications"
+msgstr ""
+
+#: printrun/pronterface.py:709
+msgid "Print all G-code sent to and received from the printer."
+msgstr ""
+
+#: printrun/pronterface.py:713
+msgid "&Settings"
+msgstr "&Instellingen"
+
+#: printrun/pronterface.py:719
+#, fuzzy
+msgid "&About Printrun"
+msgstr "Printercommunicatie volgen"
+
+#: printrun/pronterface.py:719
+msgid "Show about dialog"
+msgstr ""
+
+#: printrun/pronterface.py:720
+msgid "&Help"
+msgstr ""
+
+#: printrun/pronterface.py:746
+msgid ""
+"Printrun is a pure Python 3D printing (and other types of CNC) host software."
+msgstr ""
+
+#: printrun/pronterface.py:750
+#, fuzzy
+msgid "%.02fmm of filament have been extruded during prints"
+msgstr "mm fillament wordt gebruikt in deze print\n"
+
+#: printrun/pronterface.py:781
+#, fuzzy
+msgid "Monitor printer status"
+msgstr "Printercommunicatie volgen"
+
+#: printrun/pronterface.py:781
+msgid ""
+"Regularly monitor printer temperatures (required to have functional "
+"temperature graph or gauges)"
+msgstr ""
+
+#: printrun/pronterface.py:782
+msgid "Path to the simarrange binary to use in the STL plater"
+msgstr ""
+
+#: printrun/pronterface.py:782
+msgid "Simarrange command"
+msgstr ""
+
+#: printrun/pronterface.py:783
+msgid "Circular build platform"
+msgstr ""
+
+#: printrun/pronterface.py:783
+msgid "Draw a circular (or oval) build platform instead of a rectangular one"
+msgstr ""
+
+#: printrun/pronterface.py:784
+#, fuzzy
+msgid "Extruders count"
+msgstr "Extruden"
+
+#: printrun/pronterface.py:784
+msgid "Number of extruders"
+msgstr ""
+
+#: printrun/pronterface.py:785
+msgid "Clamp manual moves"
+msgstr ""
+
+#: printrun/pronterface.py:785
+msgid "Prevent manual moves from leaving the specified build dimensions"
+msgstr ""
+
+#: printrun/pronterface.py:786
+#, fuzzy
+msgid "Interface mode"
+msgstr "Voer macronaam in"
+
+#: printrun/pronterface.py:786
+msgid ""
+"Standard interface is a one-page, three columns layout with controls/"
+"visualization/log\n"
+"Compact mode is a one-page, two columns layout with controls + log/"
+"visualization\n"
+"Tabbed mode is a two-pages mode, where the first page shows controls and the "
+"second one shows visualization and log."
+msgstr ""
+
+#: printrun/pronterface.py:787
+msgid "Controls mode"
+msgstr ""
+
+#: printrun/pronterface.py:787
+msgid ""
+"Standard controls include all controls needed for printer setup and "
+"calibration, while Mini controls are limited to the ones needed for daily "
+"printing"
+msgstr ""
+
+#: printrun/pronterface.py:788
+msgid "Add a menu to select Slic3r profiles directly from Pronterface"
+msgstr ""
+
+#: printrun/pronterface.py:788
+msgid "Enable Slic3r integration"
+msgstr ""
+
+#: printrun/pronterface.py:789
+msgid "Update Slic3r default presets"
+msgstr ""
+
+#: printrun/pronterface.py:789
+msgid ""
+"When selecting a profile in Slic3r integration menu, also save it as the "
+"default Slic3r preset"
+msgstr ""
+
+#: printrun/pronterface.py:790
+msgid "Main visualization"
+msgstr ""
+
+#: printrun/pronterface.py:790
+msgid "Select visualization for main window."
+msgstr ""
+
+#: printrun/pronterface.py:791
+msgid "Use 3D in GCode viewer window"
+msgstr ""
+
+#: printrun/pronterface.py:791
+msgid "Use 3D mode instead of 2D layered mode in the visualization window"
+msgstr ""
+
+#: printrun/pronterface.py:792
+msgid "Use a lighter 3D visualization"
+msgstr ""
+
+#: printrun/pronterface.py:792
+msgid ""
+"Use a lighter visualization with simple lines instead of extruded paths for "
+"3D viewer"
+msgstr ""
+
+#: printrun/pronterface.py:793
+msgid "Track current layer in main 3D view"
+msgstr ""
+
+#: printrun/pronterface.py:793
+msgid "Track the currently printing layer in the main 3D visualization"
+msgstr ""
+
+#: printrun/pronterface.py:794
+msgid "Display temperature graph"
+msgstr ""
+
+#: printrun/pronterface.py:794
+msgid "Display time-lapse temperature graph"
+msgstr ""
+
+#: printrun/pronterface.py:795
+msgid "Display graphical gauges for temperatures visualization"
+msgstr ""
+
+#: printrun/pronterface.py:795
+msgid "Display temperature gauges"
+msgstr ""
+
+#: printrun/pronterface.py:796
+msgid "Display a checkbox that, when check, locks most of Pronterface"
+msgstr ""
+
+#: printrun/pronterface.py:796
+msgid "Display interface lock checkbox"
+msgstr ""
+
+#: printrun/pronterface.py:797
+msgid "If lock checkbox is enabled, lock the interface when starting a print"
+msgstr ""
+
+#: printrun/pronterface.py:797
+msgid "Lock interface upon print start"
+msgstr ""
+
+#: printrun/pronterface.py:804
+msgid "Preview extrusion width"
+msgstr ""
+
+#: printrun/pronterface.py:804
+msgid "Width of Extrusion in Preview"
+msgstr ""
+
+#: printrun/pronterface.py:805
+msgid "Fine Grid Spacing"
+msgstr ""
+
+#: printrun/pronterface.py:805
+msgid "Fine grid spacing"
+msgstr ""
+
+#: printrun/pronterface.py:806
+msgid "Coarse Grid Spacing"
+msgstr ""
+
+#: printrun/pronterface.py:806
+msgid "Coarse grid spacing"
+msgstr ""
+
+#: printrun/pronterface.py:807
+msgid "Background color"
+msgstr ""
+
+#: printrun/pronterface.py:807
+msgid "Pronterface background color"
+msgstr ""
+
+#: printrun/pronterface.py:808
+msgid "3D view background color"
+msgstr ""
+
+#: printrun/pronterface.py:808
+msgid "Color of the 3D view background"
+msgstr ""
+
+#: printrun/pronterface.py:809
+msgid "3D view travel moves color"
+msgstr ""
+
+#: printrun/pronterface.py:809
+msgid "Color of travel moves in 3D view"
+msgstr ""
+
+#: printrun/pronterface.py:810
+msgid "3D view print moves color"
+msgstr ""
+
+#: printrun/pronterface.py:810
+msgid "Color of print moves with tool 0 in 3D view"
+msgstr ""
+
+#: printrun/pronterface.py:811
+msgid "3D view tool 1 moves color"
+msgstr ""
+
+#: printrun/pronterface.py:811
+msgid "Color of print moves with tool 1 in 3D view"
+msgstr ""
+
+#: printrun/pronterface.py:812
+msgid "3D view printed moves color"
+msgstr ""
+
+#: printrun/pronterface.py:812
+msgid "Color of printed moves in 3D view"
+msgstr ""
+
+#: printrun/pronterface.py:813
+msgid "3D view current layer moves color"
+msgstr ""
+
+#: printrun/pronterface.py:813
+msgid "Color of moves in current layer in 3D view"
+msgstr ""
+
+#: printrun/pronterface.py:814
+msgid "3D view printed current layer moves color"
+msgstr ""
+
+#: printrun/pronterface.py:814
+msgid "Color of already printed moves from current layer in 3D view"
+msgstr ""
+
+#: printrun/pronterface.py:815
+msgid "Changing most settings here will require restart to get effect"
+msgstr ""
+
+#: printrun/pronterface.py:815
+msgid "Note:"
+msgstr ""
+
+#: printrun/pronterface.py:822
+msgid "automatically try to connect to printer on startup"
+msgstr ""
+
+#: printrun/pronterface.py:835 printrun/pronterface.py:1316
+msgid "Failed to load recent files list:"
+msgstr ""
+
+#: printrun/pronterface.py:916
+#, fuzzy
+msgid "SD upload: %04.2f%% |"
+msgstr " SD printen:%04.2f %%"
+
+#: printrun/pronterface.py:917 printrun/pronterface.py:922
+msgid " Line# %d of %d lines |"
+msgstr ""
+
+#: printrun/pronterface.py:919
+#, fuzzy
+msgid "SD printing: %04.2f%% |"
+msgstr " SD printen:%04.2f %%"
+
+#: printrun/pronterface.py:921
+#, fuzzy
+msgid "Printing: %04.2f%% |"
+msgstr " Printen:%04.2f %% |"
+
+#: printrun/pronterface.py:924
+msgid " Est: %s of %s remaining | "
+msgstr ""
+
+#: printrun/pronterface.py:926
+#, fuzzy
+msgid " Z: %.3f mm"
+msgstr " Z: %0.2f mm"
+
+#: printrun/pronterface.py:931
+msgid "Disconnecting after 4 failed writes."
+msgstr ""
+
+#: printrun/pronterface.py:972
+#, fuzzy
+msgid "Locking interface."
+msgstr "Printer Interface"
+
+#: printrun/pronterface.py:976
+#, fuzzy
+msgid "Unlocking interface."
+msgstr "Printercommunicatie wordt gevolgd."
+
+#: printrun/pronterface.py:985
+#, fuzzy
+msgid "Connecting..."
+msgstr "Verbind"
+
+#: printrun/pronterface.py:997
+msgid "Could not parse baud rate: "
+msgstr ""
+
+#: printrun/pronterface.py:1013 printrun/pronterface.py:1023
+msgid "Error: You are trying to connect to a non-existing port."
+msgstr ""
+
+#: printrun/pronterface.py:1015
+msgid "Error: You don't have permission to open %s."
+msgstr ""
+
+#: printrun/pronterface.py:1016
+msgid "You might need to add yourself to the dialout group."
+msgstr ""
+
+#: printrun/pronterface.py:1043
+#, fuzzy
+msgid "Disconnected."
+msgstr "Ontkoppel"
+
+#: printrun/pronterface.py:1071
+#, fuzzy
+msgid "Reset."
+msgstr "Reset"
+
+#: printrun/pronterface.py:1072
+msgid "Are you sure you want to reset the printer?"
+msgstr "Weet je zeker dat je de printer wilt resetten?"
+
+#: printrun/pronterface.py:1072
+msgid "Reset?"
+msgstr "resetten?"
+
+#: printrun/pronterface.py:1093
+msgid "Restart"
+msgstr "Herstart"
+
+#: printrun/pronterface.py:1126
+msgid "Pick SD filename"
+msgstr "Kies bestandsnaam op SD"
+
+#: printrun/pronterface.py:1144
+msgid "File upload complete"
+msgstr "Bestandsupload voltooid"
+
+#: printrun/pronterface.py:1151
+msgid "Print paused at: %s"
+msgstr ""
+
+#: printrun/pronterface.py:1163
+msgid "Resume"
+msgstr "Hervat"
+
+#: printrun/pronterface.py:1166
+#, fuzzy
+msgid "Resuming."
+msgstr "Hervat"
+
+#: printrun/pronterface.py:1192
+msgid "Pick SD file"
+msgstr "Kies bestand op SD"
+
+#: printrun/pronterface.py:1192
+msgid "Select the file to print"
+msgstr "Kies het te printen bestand"
+
+#: printrun/pronterface.py:1228 printrun/pronterface.py:1259
+#, fuzzy
+msgid "Slicing "
+msgstr "Skeinforge draait"
+
+#: printrun/pronterface.py:1237
+msgid "Failed to execute slicing software: "
+msgstr ""
+
+#: printrun/pronterface.py:1244
+#, fuzzy
+msgid "Slicing..."
+msgstr "Skeinforge draait..."
+
+#: printrun/pronterface.py:1296
+msgid "Open file to print"
+msgstr "Open het te printen bestand"
+
+#: printrun/pronterface.py:1297
+#, fuzzy
+msgid ""
+"OBJ, STL, and GCODE files (*.gcode;*.gco;*.g;*.stl;*.STL;*.obj;*.OBJ)|*."
+"gcode;*.gco;*.g;*.stl;*.STL;*.obj;*.OBJ|All Files (*.*)|*.*"
+msgstr "STL en GCODE bestanden (;*.gcode;*.g;*.stl;*.STL;)"
+
+#: printrun/pronterface.py:1325
+msgid "Could not update recent files list:"
+msgstr ""
+
+#: printrun/pronterface.py:1359
+msgid "Loaded %s, %d lines"
+msgstr "Geladen %s, %d regels"
+
+#: printrun/pronterface.py:1362
+#, fuzzy
+msgid "Load File"
+msgstr "open bestand"
+
+#: printrun/pronterface.py:1376
+#, fuzzy
+msgid "%.2fmm of filament used in this print"
+msgstr "mm fillament wordt gebruikt in deze print\n"
+
+#: printrun/pronterface.py:1377
+msgid "The print goes:"
+msgstr ""
+
+#: printrun/pronterface.py:1378
+msgid "- from %.2f mm to %.2f mm in X and is %.2f mm wide"
+msgstr ""
+
+#: printrun/pronterface.py:1379
+msgid "- from %.2f mm to %.2f mm in Y and is %.2f mm deep"
+msgstr ""
+
+#: printrun/pronterface.py:1380
+msgid "- from %.2f mm to %.2f mm in Z and is %.2f mm high"
+msgstr ""
+
+#: printrun/pronterface.py:1450
+msgid "Printer is now online."
+msgstr "Printer is nu verbonden."
+
+#: printrun/pronterface.py:1455
+msgid "Disconnect"
+msgstr "Ontkoppel"
+
+#: printrun/pronterface.py:1688
+#, fuzzy
+msgid "click to add new custom button"
+msgstr "Definieer eigen knop."
+
+#: printrun/pronterface.py:1694
+msgid "Execute command: "
+msgstr ""
+
+#: printrun/pronterface.py:1714
+msgid ""
+"Defines custom button. Usage: button <num> \"title\" [/c \"colour\"] command"
+msgstr ""
+"Definieert eigen knop. Gebruik: knop <num> \"titel\" [/c \"kleur\"] commando"
+
+#: printrun/pronterface.py:1736
+msgid "Custom button number should be between 0 and 63"
+msgstr "Knopnummer moet tussen 0 en 63 zijn"
+
+#: printrun/pronterface.py:1827
+msgid "Edit custom button '%s'"
+msgstr "Wijzig gedefineerde knop '%s'"
+
+#: printrun/pronterface.py:1829
+msgid "Move left <<"
+msgstr "Verplaats links <<"
+
+#: printrun/pronterface.py:1832
+msgid "Move right >>"
+msgstr "Verplaats rechts >>"
+
+#: printrun/pronterface.py:1836
+msgid "Remove custom button '%s'"
+msgstr "Verwijder gedefinieerde knop '%s'"
+
+#: printrun/pronterface.py:1839
+msgid "Add custom button"
+msgstr "Definieer eigen knop."
+
+#: printrun/pronterface.py:1972
+msgid "event object missing"
+msgstr "vermist object"
+
+#: printrun/pronterface.py:1985
+msgid "Do you want to erase the macro?"
+msgstr "Wilt u de macro verwijderen?"
+
+#: printrun/pronterface.py:1989
+msgid "Cancelled."
+msgstr "Afgebroken"
+
+#: printrun/pronterface.py:2007
+msgid "Enter macro name"
+msgstr "Voer macronaam in"
+
+#: printrun/pronterface.py:2010
+msgid "Macro name:"
+msgstr "Macronaam:"
+
+#: printrun/pronterface.py:2013
+msgid "Ok"
+msgstr "Ok"
+
+#: printrun/pronterface.py:2035
+msgid "Macro name may contain only ASCII alphanumeric symbols and underscores"
+msgstr ""
+
+#: printrun/pronterface.py:2038
+msgid "Name '%s' is being used by built-in command"
+msgstr "Naam '%s' wordt gebruikt door ingebouwde instructie"
+
+#: pronsole.py:31
+msgid "Caught an exception, exiting:"
+msgstr ""
+
+#~ msgid "Check temp"
+#~ msgstr "Controleer Temp."
+
+#~ msgid "Mini mode"
+#~ msgstr "Mini-venster"
+
+#~ msgid "Z:"
+#~ msgstr "Z:"
+
+#~ msgid "Full mode"
+#~ msgstr "Volledig venster"
+
+#~ msgid "Printer is online. "
+#~ msgstr "Printer is verbonden. "
+
+#~ msgid "Bed"
+#~ msgstr "Bed"
+
+#~ msgid "Hotend"
+#~ msgstr "Element"
+
+#~ msgid ", %d lines"
+#~ msgstr ", %d regels"
+
+#, fuzzy
+#~ msgid "Paused."
+#~ msgstr "Pauze"
+
+#~ msgid "X+100"
+#~ msgstr "X+100"
+
+#~ msgid "X+10"
+#~ msgstr "X+10"
+
+#~ msgid "X+1"
+#~ msgstr "X+1"
+
+#~ msgid "X+0.1"
+#~ msgstr "X+0.1"
+
+#~ msgid "HomeX"
+#~ msgstr "0-puntX"
+
+#~ msgid "X-0.1"
+#~ msgstr "X-0.1"
+
+#~ msgid "X-1"
+#~ msgstr "X-1"
+
+#~ msgid "X-10"
+#~ msgstr "X-10"
+
+#~ msgid "X-100"
+#~ msgstr "X-100"
+
+#~ msgid "Y+100"
+#~ msgstr "Y+100"
+
+#~ msgid "Y+10"
+#~ msgstr "Y+10"
+
+#~ msgid "Y+1"
+#~ msgstr "Y+1"
+
+#~ msgid "Y+0.1"
+#~ msgstr "Y+0.1"
+
+#~ msgid "HomeY"
+#~ msgstr "0-puntY"
+
+#~ msgid "Y-0.1"
+#~ msgstr "Y-0.1"
+
+#~ msgid "Y-1"
+#~ msgstr "Y-1"
+
+#~ msgid "Y-10"
+#~ msgstr "Y-10"
+
+#~ msgid "Y-100"
+#~ msgstr "Y-100"
+
+#~ msgid "Z+10"
+#~ msgstr "Z+10"
+
+#~ msgid "Z+1"
+#~ msgstr "Z+1"
+
+#~ msgid "Z+0.1"
+#~ msgstr "Z+0.1"
+
+#~ msgid "HomeZ"
+#~ msgstr "0-puntZ"
+
+#~ msgid "Z-0.1"
+#~ msgstr "Z-0.1"
+
+#~ msgid "Z-1"
+#~ msgstr "Z-1"
+
+#~ msgid "Z-10"
+#~ msgstr "Z-10"
+
+#~ msgid "Home"
+#~ msgstr "0-punt"
+
+#~ msgid " degrees Celsius."
+#~ msgstr " graden Celsius."
+
+#~ msgid "SFACT Quick Settings"
+#~ msgstr "SFACT Snelinstelling"
+
+#~ msgid " Quickly adjust SFACT settings for active profile"
+#~ msgstr " Eenvoudig SFACT's huidige profiel instellen"
+
+#~ msgid "Name '"
+#~ msgstr "Naam '"
+
+#~ msgid "Skeinforge execution failed."
+#~ msgstr "Skeinforge was niet succesvol."
+
+#~ msgid ""
+#~ "Skeinforge not found. \n"
+#~ "Please copy Skeinforge into a directory named \"skeinforge\" in the same "
+#~ "directory as this file."
+#~ msgstr ""
+#~ "Skeinforge niet gevonden.\n"
+#~ "Plaats Skeinforge in een map met de naam \"skeinforge\" in dezelfde map "
+#~ "als dit bestand."