--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/sanguino/firmwares/arduino-usbdfu/readme.txt	Thu Jul 07 12:23:34 2016 +0200
@@ -0,0 +1,7 @@
+To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader:
+1. unpack the source into LUFA's Bootloader directory
+2. set ARDUINO_MODEL_PID in the makefile as appropriate 
+3. do "make clean; make; make program"
+
+Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU".  Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory)
+