comparison: sanguino/firmwares/arduino-usbdfu/readme.txt
sanguino/firmwares/arduino-usbdfu/readme.txt
- changeset 2
- b373b0288715
equal
deleted
inserted
replaced
|
1 To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader: |
|
2 1. unpack the source into LUFA's Bootloader directory |
|
3 2. set ARDUINO_MODEL_PID in the makefile as appropriate |
|
4 3. do "make clean; make; make program" |
|
5 |
|
6 Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU". Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory) |
|
7 |