Mercurial > hg-public > lasercut-scripts / file revision

# This file is part of the Printrun suite.
#
# Printrun is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Printrun is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Printrun.  If not, see <http://www.gnu.org/licenses/>.

import wx

from .xybuttons import XYButtons, XYButtonsMini
from .zbuttons import ZButtons, ZButtonsMini
from .graph import Graph
from .widgets import TempGauge
from wx.lib.agw.floatspin import FloatSpin

from .utils import make_button, make_custom_button

class XYZControlsSizer(wx.GridBagSizer):

    def __init__(self, root, parentpanel = None):
        super(XYZControlsSizer, self).__init__()
        if not parentpanel: parentpanel = root.panel
        root.xyb = XYButtons(parentpanel, root.moveXY, root.homeButtonClicked, root.spacebarAction, root.bgcolor, zcallback=root.moveZ)
        self.Add(root.xyb, pos = (0, 1), flag = wx.ALIGN_CENTER)
        root.zb = ZButtons(parentpanel, root.moveZ, root.bgcolor)
        self.Add(root.zb, pos = (0, 2), flag = wx.ALIGN_CENTER)
        wx.CallAfter(root.xyb.SetFocus)

def add_extra_controls(self, root, parentpanel, extra_buttons = None, mini_mode = False):
    standalone_mode = extra_buttons is not None
    base_line = 1 if standalone_mode else 2

    if standalone_mode:
        gauges_base_line = base_line + 10
    elif mini_mode and root.display_graph:
        gauges_base_line = base_line + 7
    else:
        gauges_base_line = base_line + 6
    tempdisp_line = gauges_base_line + (2 if root.display_gauges else 0)
    if mini_mode and root.display_graph:
        e_base_line = base_line + 3
    else:
        e_base_line = base_line + 2

    pos_mapping = {
        "htemp_label": (base_line + 0, 0),
        "htemp_off": (base_line + 0, 2),
        "htemp_val": (base_line + 0, 3),
        "htemp_set": (base_line + 0, 4),
        "btemp_label": (base_line + 1, 0),
        "btemp_off": (base_line + 1, 2),
        "btemp_val": (base_line + 1, 3),
        "btemp_set": (base_line + 1, 4),
        "ebuttons": (e_base_line + 0, 0),
        "esettings": (e_base_line + 1, 0),
        "speedcontrol": (e_base_line + 2, 0),
        "flowcontrol": (e_base_line + 3, 0),
        "htemp_gauge": (gauges_base_line + 0, 0),
        "btemp_gauge": (gauges_base_line + 1, 0),
        "tempdisp": (tempdisp_line, 0),
        "extrude": (3, 0),
        "reverse": (3, 2),
    }

    span_mapping = {
        "htemp_label": (1, 2),
        "htemp_off": (1, 1),
        "htemp_val": (1, 1),
        "htemp_set": (1, 1 if root.display_graph else 2),
        "btemp_label": (1, 2),
        "btemp_off": (1, 1),
        "btemp_val": (1, 1),
        "btemp_set": (1, 1 if root.display_graph else 2),
        "ebuttons": (1, 5 if root.display_graph else 6),
        "esettings": (1, 5 if root.display_graph else 6),
        "speedcontrol": (1, 5 if root.display_graph else 6),
        "flowcontrol": (1, 5 if root.display_graph else 6),
        "htemp_gauge": (1, 5 if mini_mode else 6),
        "btemp_gauge": (1, 5 if mini_mode else 6),
        "tempdisp": (1, 5 if mini_mode else 6),
        "extrude": (1, 2),
        "reverse": (1, 3),
    }

    if standalone_mode:
        pos_mapping["tempgraph"] = (base_line + 5, 0)
        span_mapping["tempgraph"] = (5, 6)
    elif mini_mode:
        pos_mapping["tempgraph"] = (base_line + 2, 0)
        span_mapping["tempgraph"] = (1, 5)
    else:
        pos_mapping["tempgraph"] = (base_line + 0, 5)
        span_mapping["tempgraph"] = (5, 1)

    if mini_mode:
        pos_mapping["etool_label"] = (0, 0)
        pos_mapping["etool_val"] = (0, 1)
        pos_mapping["edist_label"] = (0, 2)
        pos_mapping["edist_val"] = (0, 3)
        pos_mapping["edist_unit"] = (0, 4)
    else:
        pos_mapping["edist_label"] = (0, 0)
        pos_mapping["edist_val"] = (1, 0)
        pos_mapping["edist_unit"] = (1, 1)
        pos_mapping["efeed_label"] = (0, 2)
        pos_mapping["efeed_val"] = (1, 2)
        pos_mapping["efeed_unit"] = (1, 3)

    def add(name, widget, *args, **kwargs):
        kwargs["pos"] = pos_mapping[name]
        if name in span_mapping:
            kwargs["span"] = span_mapping[name]
        if "container" in kwargs:
            container = kwargs["container"]
            del kwargs["container"]
        else:
            container = self
        container.Add(widget, *args, **kwargs)

    # Hotend & bed temperatures #

    # Hotend temp
    add("htemp_label", wx.StaticText(parentpanel, -1, _("Heat:")), flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)
    htemp_choices = [root.temps[i] + " (" + i + ")" for i in sorted(root.temps.keys(), key = lambda x:root.temps[x])]

    root.settoff = make_button(parentpanel, _("Off"), lambda e: root.do_settemp("off"), _("Switch Hotend Off"), size = (38, -1), style = wx.BU_EXACTFIT)
    root.printerControls.append(root.settoff)
    add("htemp_off", root.settoff)

    if root.settings.last_temperature not in map(float, root.temps.values()):
        htemp_choices = [str(root.settings.last_temperature)] + htemp_choices
    root.htemp = wx.ComboBox(parentpanel, -1, choices = htemp_choices,
                             style = wx.CB_DROPDOWN, size = (80, -1))
    root.htemp.SetToolTip(wx.ToolTip(_("Select Temperature for Hotend")))
    root.htemp.Bind(wx.EVT_COMBOBOX, root.htemp_change)

    add("htemp_val", root.htemp)
    root.settbtn = make_button(parentpanel, _("Set"), root.do_settemp, _("Switch Hotend On"), size = (38, -1), style = wx.BU_EXACTFIT)
    root.printerControls.append(root.settbtn)
    add("htemp_set", root.settbtn, flag = wx.EXPAND)

    # Bed temp
    add("btemp_label", wx.StaticText(parentpanel, -1, _("Bed:")), flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)
    btemp_choices = [root.bedtemps[i] + " (" + i + ")" for i in sorted(root.bedtemps.keys(), key = lambda x:root.temps[x])]

    root.setboff = make_button(parentpanel, _("Off"), lambda e: root.do_bedtemp("off"), _("Switch Heated Bed Off"), size = (38, -1), style = wx.BU_EXACTFIT)
    root.printerControls.append(root.setboff)
    add("btemp_off", root.setboff)

    if root.settings.last_bed_temperature not in map(float, root.bedtemps.values()):
        btemp_choices = [str(root.settings.last_bed_temperature)] + btemp_choices
    root.btemp = wx.ComboBox(parentpanel, -1, choices = btemp_choices,
                             style = wx.CB_DROPDOWN, size = (80, -1))
    root.btemp.SetToolTip(wx.ToolTip(_("Select Temperature for Heated Bed")))
    root.btemp.Bind(wx.EVT_COMBOBOX, root.btemp_change)
    add("btemp_val", root.btemp)

    root.setbbtn = make_button(parentpanel, _("Set"), root.do_bedtemp, _("Switch Heated Bed On"), size = (38, -1), style = wx.BU_EXACTFIT)
    root.printerControls.append(root.setbbtn)
    add("btemp_set", root.setbbtn, flag = wx.EXPAND)

    root.btemp.SetValue(str(root.settings.last_bed_temperature))
    root.htemp.SetValue(str(root.settings.last_temperature))

    # added for an error where only the bed would get (pla) or (abs).
    # This ensures, if last temp is a default pla or abs, it will be marked so.
    # if it is not, then a (user) remark is added. This denotes a manual entry

    for i in btemp_choices:
        if i.split()[0] == str(root.settings.last_bed_temperature).split('.')[0] or i.split()[0] == str(root.settings.last_bed_temperature):
            root.btemp.SetValue(i)
    for i in htemp_choices:
        if i.split()[0] == str(root.settings.last_temperature).split('.')[0] or i.split()[0] == str(root.settings.last_temperature):
            root.htemp.SetValue(i)

    if '(' not in root.btemp.Value:
        root.btemp.SetValue(root.btemp.Value + ' (user)')
    if '(' not in root.htemp.Value:
        root.htemp.SetValue(root.htemp.Value + ' (user)')

    # Speed control #
    speedpanel = root.newPanel(parentpanel)
    speedsizer = wx.BoxSizer(wx.HORIZONTAL)
    speedsizer.Add(wx.StaticText(speedpanel, -1, _("Print speed:")), flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)

    root.speed_slider = wx.Slider(speedpanel, -1, 100, 1, 300)
    speedsizer.Add(root.speed_slider, 1, flag = wx.EXPAND)

    root.speed_spin = FloatSpin(speedpanel, -1, value = 100, min_val = 1, max_val = 300, digits = 0, style = wx.ALIGN_LEFT, size = (80, -1))
    speedsizer.Add(root.speed_spin, 0, flag = wx.ALIGN_CENTER_VERTICAL)
    root.speed_label = wx.StaticText(speedpanel, -1, _("%"))
    speedsizer.Add(root.speed_label, flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)

    def speedslider_set(event):
        root.do_setspeed()
        root.speed_setbtn.SetBackgroundColour(wx.NullColour)
    root.speed_setbtn = make_button(speedpanel, _("Set"), speedslider_set, _("Set print speed factor"), size = (38, -1), style = wx.BU_EXACTFIT)
    root.printerControls.append(root.speed_setbtn)
    speedsizer.Add(root.speed_setbtn, flag = wx.ALIGN_CENTER)
    speedpanel.SetSizer(speedsizer)
    add("speedcontrol", speedpanel, flag = wx.EXPAND)

    def speedslider_spin(event):
        value = root.speed_spin.GetValue()
        root.speed_setbtn.SetBackgroundColour("red")
        root.speed_slider.SetValue(value)
    root.speed_spin.Bind(wx.EVT_SPINCTRL, speedslider_spin)

    def speedslider_scroll(event):
        value = root.speed_slider.GetValue()
        root.speed_setbtn.SetBackgroundColour("red")
        root.speed_spin.SetValue(value)
    root.speed_slider.Bind(wx.EVT_SCROLL, speedslider_scroll)

    # Flow control #
    flowpanel = root.newPanel(parentpanel)
    flowsizer = wx.BoxSizer(wx.HORIZONTAL)
    flowsizer.Add(wx.StaticText(flowpanel, -1, _("Print flow:")), flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)

    root.flow_slider = wx.Slider(flowpanel, -1, 100, 1, 300)
    flowsizer.Add(root.flow_slider, 1, flag = wx.EXPAND)

    root.flow_spin = FloatSpin(flowpanel, -1, value = 100, min_val = 1, max_val = 300, digits = 0, style = wx.ALIGN_LEFT, size = (60, -1))
    flowsizer.Add(root.flow_spin, 0, flag = wx.ALIGN_CENTER_VERTICAL)
    root.flow_label = wx.StaticText(flowpanel, -1, _("%"))
    flowsizer.Add(root.flow_label, flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)

    def flowslider_set(event):
        root.do_setflow()
        root.flow_setbtn.SetBackgroundColour(wx.NullColour)
    root.flow_setbtn = make_button(flowpanel, _("Set"), flowslider_set, _("Set print flow factor"), size = (38, -1), style = wx.BU_EXACTFIT)
    root.printerControls.append(root.flow_setbtn)
    flowsizer.Add(root.flow_setbtn, flag = wx.ALIGN_CENTER)
    flowpanel.SetSizer(flowsizer)
    add("flowcontrol", flowpanel, flag = wx.EXPAND)

    def flowslider_spin(event):
        value = root.flow_spin.GetValue()
        root.flow_setbtn.SetBackgroundColour("red")
        root.flow_slider.SetValue(value)
    root.flow_spin.Bind(wx.EVT_SPINCTRL, flowslider_spin)

    def flowslider_scroll(event):
        value = root.flow_slider.GetValue()
        root.flow_setbtn.SetBackgroundColour("red")
        root.flow_spin.SetValue(value)
    root.flow_slider.Bind(wx.EVT_SCROLL, flowslider_scroll)

    # Temperature gauges #

    if root.display_gauges:
        root.hottgauge = TempGauge(parentpanel, size = (-1, 24), title = _("Heater:"), maxval = 300, bgcolor = root.bgcolor)
        add("htemp_gauge", root.hottgauge, flag = wx.EXPAND)
        root.bedtgauge = TempGauge(parentpanel, size = (-1, 24), title = _("Bed:"), maxval = 150, bgcolor = root.bgcolor)
        add("btemp_gauge", root.bedtgauge, flag = wx.EXPAND)

        def hotendgauge_scroll_setpoint(e):
            rot = e.GetWheelRotation()
            if rot > 0:
                root.do_settemp(str(root.hsetpoint + 1))
            elif rot < 0:
                root.do_settemp(str(max(0, root.hsetpoint - 1)))

        def bedgauge_scroll_setpoint(e):
            rot = e.GetWheelRotation()
            if rot > 0:
                root.do_settemp(str(root.bsetpoint + 1))
            elif rot < 0:
                root.do_settemp(str(max(0, root.bsetpoint - 1)))
        root.hottgauge.Bind(wx.EVT_MOUSEWHEEL, hotendgauge_scroll_setpoint)
        root.bedtgauge.Bind(wx.EVT_MOUSEWHEEL, bedgauge_scroll_setpoint)

    # Temperature (M105) feedback display #
    root.tempdisp = wx.StaticText(parentpanel, -1, "", style = wx.ST_NO_AUTORESIZE)

    def on_tempdisp_size(evt):
        root.tempdisp.Wrap(root.tempdisp.GetSize().width)
    root.tempdisp.Bind(wx.EVT_SIZE, on_tempdisp_size)

    def tempdisp_setlabel(label):
        wx.StaticText.SetLabel(root.tempdisp, label)
        root.tempdisp.Wrap(root.tempdisp.GetSize().width)
        root.tempdisp.SetSize((-1, root.tempdisp.GetBestSize().height))
    root.tempdisp.SetLabel = tempdisp_setlabel
    add("tempdisp", root.tempdisp, flag = wx.EXPAND)

    # Temperature graph #

    if root.display_graph:
        root.graph = Graph(parentpanel, wx.ID_ANY, root)
        add("tempgraph", root.graph, flag = wx.EXPAND | wx.ALL, border = 5)
        root.graph.Bind(wx.EVT_LEFT_DOWN, root.graph.show_graph_window)

    # Extrusion controls #

    # Extrusion settings
    esettingspanel = root.newPanel(parentpanel)
    esettingssizer = wx.GridBagSizer()
    esettingssizer.SetEmptyCellSize((0, 0))
    root.edist = FloatSpin(esettingspanel, -1, value = root.settings.last_extrusion, min_val = 0, max_val = 1000, size = (90, -1), digits = 1)
    root.edist.SetBackgroundColour((225, 200, 200))
    root.edist.SetForegroundColour("black")
    root.edist.Bind(wx.EVT_SPINCTRL, root.setfeeds)
    root.edist.Bind(wx.EVT_TEXT, root.setfeeds)
    add("edist_label", wx.StaticText(esettingspanel, -1, _("Length:")), container = esettingssizer, flag = wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_LEFT | wx.RIGHT | wx.LEFT, border = 5)
    add("edist_val", root.edist, container = esettingssizer, flag = wx.ALIGN_CENTER | wx.RIGHT, border = 5)
    unit_label = _("mm") if mini_mode else _("mm @")
    add("edist_unit", wx.StaticText(esettingspanel, -1, unit_label), container = esettingssizer, flag = wx.ALIGN_CENTER | wx.RIGHT, border = 5)
    root.edist.SetToolTip(wx.ToolTip(_("Amount to Extrude or Retract (mm)")))
    if not mini_mode:
        root.efeedc = FloatSpin(esettingspanel, -1, value = root.settings.e_feedrate, min_val = 0, max_val = 50000, size = (90, -1), digits = 1)
        root.efeedc.SetToolTip(wx.ToolTip(_("Extrude / Retract speed (mm/min)")))
        root.efeedc.SetBackgroundColour((225, 200, 200))
        root.efeedc.SetForegroundColour("black")
        root.efeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
        root.efeedc.Bind(wx.EVT_TEXT, root.setfeeds)
        add("efeed_val", root.efeedc, container = esettingssizer, flag = wx.ALIGN_CENTER | wx.RIGHT, border = 5)
        add("efeed_label", wx.StaticText(esettingspanel, -1, _("Speed:")), container = esettingssizer, flag = wx.ALIGN_LEFT)
        add("efeed_unit", wx.StaticText(esettingspanel, -1, _("mm/\nmin")), container = esettingssizer, flag = wx.ALIGN_CENTER)
    else:
        root.efeedc = None
    esettingspanel.SetSizer(esettingssizer)
    add("esettings", esettingspanel, flag = wx.ALIGN_LEFT)

    if not standalone_mode:
        ebuttonspanel = root.newPanel(parentpanel)
        ebuttonssizer = wx.BoxSizer(wx.HORIZONTAL)
        if root.settings.extruders > 1:
            etool_sel_panel = esettingspanel if mini_mode else ebuttonspanel
            etool_label = wx.StaticText(etool_sel_panel, -1, _("Tool:"))
            if root.settings.extruders == 2:
                root.extrudersel = wx.Button(etool_sel_panel, -1, "0", style = wx.BU_EXACTFIT)
                root.extrudersel.SetToolTip(wx.ToolTip(_("Click to switch current extruder")))

                def extrudersel_cb(event):
                    if root.extrudersel.GetLabel() == "1":
                        new = "0"
                    else:
                        new = "1"
                    root.extrudersel.SetLabel(new)
                    root.tool_change(event)
                root.extrudersel.Bind(wx.EVT_BUTTON, extrudersel_cb)
                root.extrudersel.GetValue = root.extrudersel.GetLabel
                root.extrudersel.SetValue = root.extrudersel.SetLabel
            else:
                choices = [str(i) for i in range(0, root.settings.extruders)]
                root.extrudersel = wx.ComboBox(etool_sel_panel, -1, choices = choices,
                                               style = wx.CB_DROPDOWN | wx.CB_READONLY,
                                               size = (50, -1))
                root.extrudersel.SetToolTip(wx.ToolTip(_("Select current extruder")))
                root.extrudersel.SetValue(choices[0])
                root.extrudersel.Bind(wx.EVT_COMBOBOX, root.tool_change)
            root.printerControls.append(root.extrudersel)
            if mini_mode:
                add("etool_label", etool_label, container = esettingssizer, flag = wx.ALIGN_CENTER)
                add("etool_val", root.extrudersel, container = esettingssizer)
            else:
                ebuttonssizer.Add(etool_label, flag = wx.ALIGN_CENTER)
                ebuttonssizer.Add(root.extrudersel)

        for key in ["extrude", "reverse"]:
            desc = root.cpbuttons[key]
            btn = make_custom_button(root, ebuttonspanel, desc,
                                     style = wx.BU_EXACTFIT)
            ebuttonssizer.Add(btn, 1, flag = wx.EXPAND)

        ebuttonspanel.SetSizer(ebuttonssizer)
        add("ebuttons", ebuttonspanel, flag = wx.EXPAND)
    else:
        for key, btn in extra_buttons.items():
            add(key, btn, flag = wx.EXPAND)

class ControlsSizer(wx.GridBagSizer):

    def __init__(self, root, parentpanel = None, standalone_mode = False, mini_mode = False):
        super(ControlsSizer, self).__init__()
        if not parentpanel: parentpanel = root.panel
        if mini_mode: self.make_mini(root, parentpanel)
        else: self.make_standard(root, parentpanel, standalone_mode)

    def make_standard(self, root, parentpanel, standalone_mode):
        lltspanel = root.newPanel(parentpanel)
        llts = wx.BoxSizer(wx.HORIZONTAL)
        lltspanel.SetSizer(llts)
        self.Add(lltspanel, pos = (0, 0), span = (1, 6))
        xyzpanel = root.newPanel(parentpanel)
        self.xyzsizer = XYZControlsSizer(root, xyzpanel)
        xyzpanel.SetSizer(self.xyzsizer)
        self.Add(xyzpanel, pos = (1, 0), span = (1, 6), flag = wx.ALIGN_CENTER)

        self.extra_buttons = {}
        pos_mapping = {"extrude": (4, 0),
                       "reverse": (4, 2),
                       }
        span_mapping = {"extrude": (1, 2),
                        "reverse": (1, 3),
                        }
        for key, desc in root.cpbuttons.items():
            if not standalone_mode and key in ["extrude", "reverse"]:
                continue
            panel = lltspanel if key == "motorsoff" else parentpanel
            btn = make_custom_button(root, panel, desc)
            if key == "motorsoff":
                llts.Add(btn)
            elif not standalone_mode:
                self.Add(btn, pos = pos_mapping[key], span = span_mapping[key], flag = wx.EXPAND)
            else:
                self.extra_buttons[key] = btn

        root.xyfeedc = wx.SpinCtrl(lltspanel, -1, str(root.settings.xy_feedrate), min = 0, max = 50000, size = (97, -1))
        root.xyfeedc.SetToolTip(wx.ToolTip(_("Set Maximum Speed for X & Y axes (mm/min)")))
        llts.Add(wx.StaticText(lltspanel, -1, _("XY:")), flag = wx.ALIGN_RIGHT | wx.ALIGN_CENTER_VERTICAL)
        llts.Add(root.xyfeedc)
        llts.Add(wx.StaticText(lltspanel, -1, _("mm/min Z:")), flag = wx.ALIGN_RIGHT | wx.ALIGN_CENTER_VERTICAL)
        root.zfeedc = wx.SpinCtrl(lltspanel, -1, str(root.settings.z_feedrate), min = 0, max = 50000, size = (90, -1))
        root.zfeedc.SetToolTip(wx.ToolTip(_("Set Maximum Speed for Z axis (mm/min)")))
        llts.Add(root.zfeedc,)

        root.xyfeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
        root.zfeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
        root.xyfeedc.Bind(wx.EVT_TEXT, root.setfeeds)
        root.zfeedc.Bind(wx.EVT_TEXT, root.setfeeds)
        root.zfeedc.SetBackgroundColour((180, 255, 180))
        root.zfeedc.SetForegroundColour("black")

        if not standalone_mode:
            add_extra_controls(self, root, parentpanel, None)

    def make_mini(self, root, parentpanel):
        root.xyb = XYButtonsMini(parentpanel, root.moveXY, root.homeButtonClicked,
                                 root.spacebarAction, root.bgcolor,
                                 zcallback = root.moveZ)
        self.Add(root.xyb, pos = (1, 0), span = (1, 4), flag = wx.ALIGN_CENTER)
        root.zb = ZButtonsMini(parentpanel, root.moveZ, root.bgcolor)
        self.Add(root.zb, pos = (0, 4), span = (2, 1), flag = wx.ALIGN_CENTER)
        wx.CallAfter(root.xyb.SetFocus)

        pos_mapping = {"motorsoff": (0, 0),
                       }
        span_mapping = {"motorsoff": (1, 4),
                        }
        btn = make_custom_button(root, parentpanel, root.cpbuttons["motorsoff"])
        self.Add(btn, pos = pos_mapping["motorsoff"], span = span_mapping["motorsoff"], flag = wx.EXPAND)

        add_extra_controls(self, root, parentpanel, None, True)