usbdrv/usbdrvasm15.inc@93b48be0aa53
usbdrv/usbdrvasm15.inc
Thu, 16 Feb 2017 14:45:20 +0100
- author
- Malte Di Donato <mdd@neo-soft.org>
- date
- Thu, 16 Feb 2017 14:45:20 +0100
- changeset 2
- 93b48be0aa53
- parent 0
- 9e9b2c78bd31
- permissions
- -rw-r--r--
added precompiled hex file
/* Name: usbdrvasm15.inc * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers * Author: contributed by V. Bosch * Creation Date: 2007-08-06 * Tabsize: 4 * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) */ /* Do not link this file! Link usbdrvasm.S instead, which includes the * appropriate implementation! */ /* General Description: This file is the 15 MHz version of the asssembler part of the USB driver. It requires a 15 MHz crystal (not a ceramic resonator and not a calibrated RC oscillator). See usbdrv.h for a description of the entire driver. Since almost all of this code is timing critical, don't change unless you really know what you are doing! Many parts require not only a maximum number of CPU cycles, but even an exact number of cycles! */ ;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes ;nominal frequency: 15 MHz -> 10.0 cycles per bit, 80.0 cycles per byte ; Numbers in brackets are clocks counted from center of last sync bit ; when instruction starts ;---------------------------------------------------------------------------- ; order of registers pushed: ; YL, SREG [sofError] YH, shift, x1, x2, x3, bitcnt, cnt, x4 ;---------------------------------------------------------------------------- USB_INTR_VECTOR: push YL ;2 push only what is necessary to sync with edge ASAP in YL, SREG ;1 push YL ;2 ;---------------------------------------------------------------------------- ; Synchronize with sync pattern: ; ; sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] ; sync up with J to K edge during sync pattern -- use fastest possible loops ;The first part waits at most 1 bit long since we must be in sync pattern. ;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to ;waitForJ, ensure that this prerequisite is met. waitForJ: inc YL sbis USBIN, USBMINUS brne waitForJ ; just make sure we have ANY timeout ;------------------------------------------------------------------------------- ; The following code results in a sampling window of < 1/4 bit ; which meets the spec. ;------------------------------------------------------------------------------- waitForK: ;- sbis USBIN, USBMINUS ;1 [00] <-- sample rjmp foundK ;2 [01] sbis USBIN, USBMINUS ; <-- sample rjmp foundK sbis USBIN, USBMINUS ; <-- sample rjmp foundK sbis USBIN, USBMINUS ; <-- sample rjmp foundK sbis USBIN, USBMINUS ; <-- sample rjmp foundK sbis USBIN, USBMINUS ; <-- sample rjmp foundK #if USB_COUNT_SOF lds YL, usbSofCount inc YL sts usbSofCount, YL #endif /* USB_COUNT_SOF */ #ifdef USB_SOF_HOOK USB_SOF_HOOK #endif rjmp sofError ;------------------------------------------------------------------------------ ; {3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for ; center sampling] ; we have 1 bit time for setup purposes, then sample again. ; Numbers in brackets are cycles from center of first sync (double K) ; bit after the instruction ;------------------------------------------------------------------------------ foundK: ;- [02] lds YL, usbInputBufOffset;2 [03+04] tx loop push YH ;2 [05+06] clr YH ;1 [07] subi YL, lo8(-(usbRxBuf)) ;1 [08] [rx loop init] sbci YH, hi8(-(usbRxBuf)) ;1 [09] [rx loop init] push shift ;2 [10+11] ser shift ;1 [12] sbis USBIN, USBMINUS ;1 [-1] [13] <--sample:we want two bits K (sample 1 cycle too early) rjmp haveTwoBitsK ;2 [00] [14] pop shift ;2 [15+16] undo the push from before pop YH ;2 [17+18] undo the push from before rjmp waitForK ;2 [19+20] this was not the end of sync, retry ; The entire loop from waitForK until rjmp waitForK above must not exceed two ; bit times (= 20 cycles). ;---------------------------------------------------------------------------- ; push more registers and initialize values while we sample the first bits: ;---------------------------------------------------------------------------- haveTwoBitsK: ;- [01] push x1 ;2 [02+03] push x2 ;2 [04+05] push x3 ;2 [06+07] push bitcnt ;2 [08+09] in x1, USBIN ;1 [00] [10] <-- sample bit 0 bst x1, USBMINUS ;1 [01] bld shift, 0 ;1 [02] push cnt ;2 [03+04] ldi cnt, USB_BUFSIZE ;1 [05] push x4 ;2 [06+07] tx loop rjmp rxLoop ;2 [08] ;---------------------------------------------------------------------------- ; Receiver loop (numbers in brackets are cycles within byte after instr) ;---------------------------------------------------------------------------- unstuff0: ;- [07] (branch taken) andi x3, ~0x01 ;1 [08] mov x1, x2 ;1 [09] x2 contains last sampled (stuffed) bit in x2, USBIN ;1 [00] [10] <-- sample bit 1 again andi x2, USBMASK ;1 [01] breq se0Hop ;1 [02] SE0 check for bit 1 ori shift, 0x01 ;1 [03] 0b00000001 nop ;1 [04] rjmp didUnstuff0 ;2 [05] ;----------------------------------------------------- unstuff1: ;- [05] (branch taken) mov x2, x1 ;1 [06] x1 contains last sampled (stuffed) bit andi x3, ~0x02 ;1 [07] ori shift, 0x02 ;1 [08] 0b00000010 nop ;1 [09] in x1, USBIN ;1 [00] [10] <-- sample bit 2 again andi x1, USBMASK ;1 [01] breq se0Hop ;1 [02] SE0 check for bit 2 rjmp didUnstuff1 ;2 [03] ;----------------------------------------------------- unstuff2: ;- [05] (branch taken) andi x3, ~0x04 ;1 [06] ori shift, 0x04 ;1 [07] 0b00000100 mov x1, x2 ;1 [08] x2 contains last sampled (stuffed) bit nop ;1 [09] in x2, USBIN ;1 [00] [10] <-- sample bit 3 andi x2, USBMASK ;1 [01] breq se0Hop ;1 [02] SE0 check for bit 3 rjmp didUnstuff2 ;2 [03] ;----------------------------------------------------- unstuff3: ;- [00] [10] (branch taken) in x2, USBIN ;1 [01] [11] <-- sample stuffed bit 3 one cycle too late andi x2, USBMASK ;1 [02] breq se0Hop ;1 [03] SE0 check for stuffed bit 3 andi x3, ~0x08 ;1 [04] ori shift, 0x08 ;1 [05] 0b00001000 rjmp didUnstuff3 ;2 [06] ;---------------------------------------------------------------------------- ; extra jobs done during bit interval: ; ; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs], ; overflow check, jump to the head of rxLoop ; bit 1: SE0 check ; bit 2: SE0 check, recovery from delay [bit 0 tasks took too long] ; bit 3: SE0 check, recovery from delay [bit 0 tasks took too long] ; bit 4: SE0 check, none ; bit 5: SE0 check, none ; bit 6: SE0 check, none ; bit 7: SE0 check, reconstruct: x3 is 0 at bit locations we changed, 1 at others ;---------------------------------------------------------------------------- rxLoop: ;- [09] in x2, USBIN ;1 [00] [10] <-- sample bit 1 (or possibly bit 0 stuffed) andi x2, USBMASK ;1 [01] brne SkipSe0Hop ;1 [02] se0Hop: ;- [02] rjmp se0 ;2 [03] SE0 check for bit 1 SkipSe0Hop: ;- [03] ser x3 ;1 [04] andi shift, 0xf9 ;1 [05] 0b11111001 breq unstuff0 ;1 [06] didUnstuff0: ;- [06] eor x1, x2 ;1 [07] bst x1, USBMINUS ;1 [08] bld shift, 1 ;1 [09] in x1, USBIN ;1 [00] [10] <-- sample bit 2 (or possibly bit 1 stuffed) andi x1, USBMASK ;1 [01] breq se0Hop ;1 [02] SE0 check for bit 2 andi shift, 0xf3 ;1 [03] 0b11110011 breq unstuff1 ;1 [04] do remaining work for bit 1 didUnstuff1: ;- [04] eor x2, x1 ;1 [05] bst x2, USBMINUS ;1 [06] bld shift, 2 ;1 [07] nop2 ;2 [08+09] in x2, USBIN ;1 [00] [10] <-- sample bit 3 (or possibly bit 2 stuffed) andi x2, USBMASK ;1 [01] breq se0Hop ;1 [02] SE0 check for bit 3 andi shift, 0xe7 ;1 [03] 0b11100111 breq unstuff2 ;1 [04] didUnstuff2: ;- [04] eor x1, x2 ;1 [05] bst x1, USBMINUS ;1 [06] bld shift, 3 ;1 [07] didUnstuff3: ;- [07] andi shift, 0xcf ;1 [08] 0b11001111 breq unstuff3 ;1 [09] in x1, USBIN ;1 [00] [10] <-- sample bit 4 andi x1, USBMASK ;1 [01] breq se0Hop ;1 [02] SE0 check for bit 4 eor x2, x1 ;1 [03] bst x2, USBMINUS ;1 [04] bld shift, 4 ;1 [05] didUnstuff4: ;- [05] andi shift, 0x9f ;1 [06] 0b10011111 breq unstuff4 ;1 [07] nop2 ;2 [08+09] in x2, USBIN ;1 [00] [10] <-- sample bit 5 andi x2, USBMASK ;1 [01] breq se0 ;1 [02] SE0 check for bit 5 eor x1, x2 ;1 [03] bst x1, USBMINUS ;1 [04] bld shift, 5 ;1 [05] didUnstuff5: ;- [05] andi shift, 0x3f ;1 [06] 0b00111111 breq unstuff5 ;1 [07] nop2 ;2 [08+09] in x1, USBIN ;1 [00] [10] <-- sample bit 6 andi x1, USBMASK ;1 [01] breq se0 ;1 [02] SE0 check for bit 6 eor x2, x1 ;1 [03] bst x2, USBMINUS ;1 [04] bld shift, 6 ;1 [05] didUnstuff6: ;- [05] cpi shift, 0x02 ;1 [06] 0b00000010 brlo unstuff6 ;1 [07] nop2 ;2 [08+09] in x2, USBIN ;1 [00] [10] <-- sample bit 7 andi x2, USBMASK ;1 [01] breq se0 ;1 [02] SE0 check for bit 7 eor x1, x2 ;1 [03] bst x1, USBMINUS ;1 [04] bld shift, 7 ;1 [05] didUnstuff7: ;- [05] cpi shift, 0x04 ;1 [06] 0b00000100 brlo unstuff7 ;1 [07] eor x3, shift ;1 [08] reconstruct: x3 is 0 at bit locations we changed, 1 at others nop ;1 [09] in x1, USBIN ;1 [00] [10] <-- sample bit 0 st y+, x3 ;2 [01+02] store data eor x2, x1 ;1 [03] bst x2, USBMINUS ;1 [04] bld shift, 0 ;1 [05] subi cnt, 1 ;1 [06] brcs overflow ;1 [07] rjmp rxLoop ;2 [08] ;----------------------------------------------------- unstuff4: ;- [08] andi x3, ~0x10 ;1 [09] in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 4 andi x1, USBMASK ;1 [01] breq se0 ;1 [02] SE0 check for stuffed bit 4 ori shift, 0x10 ;1 [03] rjmp didUnstuff4 ;2 [04] ;----------------------------------------------------- unstuff5: ;- [08] ori shift, 0x20 ;1 [09] in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 5 andi x2, USBMASK ;1 [01] breq se0 ;1 [02] SE0 check for stuffed bit 5 andi x3, ~0x20 ;1 [03] rjmp didUnstuff5 ;2 [04] ;----------------------------------------------------- unstuff6: ;- [08] andi x3, ~0x40 ;1 [09] in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 6 andi x1, USBMASK ;1 [01] breq se0 ;1 [02] SE0 check for stuffed bit 6 ori shift, 0x40 ;1 [03] rjmp didUnstuff6 ;2 [04] ;----------------------------------------------------- unstuff7: ;- [08] andi x3, ~0x80 ;1 [09] in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 7 andi x2, USBMASK ;1 [01] breq se0 ;1 [02] SE0 check for stuffed bit 7 ori shift, 0x80 ;1 [03] rjmp didUnstuff7 ;2 [04] macro POP_STANDARD ; 16 cycles pop x4 pop cnt pop bitcnt pop x3 pop x2 pop x1 pop shift pop YH endm macro POP_RETI ; 5 cycles pop YL out SREG, YL pop YL endm #include "asmcommon.inc" ;--------------------------------------------------------------------------- ; USB spec says: ; idle = J ; J = (D+ = 0), (D- = 1) ; K = (D+ = 1), (D- = 0) ; Spec allows 7.5 bit times from EOP to SOP for replies ;--------------------------------------------------------------------------- bitstuffN: ;- [04] eor x1, x4 ;1 [05] clr x2 ;1 [06] nop ;1 [07] rjmp didStuffN ;1 [08] ;--------------------------------------------------------------------------- bitstuff6: ;- [04] eor x1, x4 ;1 [05] clr x2 ;1 [06] rjmp didStuff6 ;1 [07] ;--------------------------------------------------------------------------- bitstuff7: ;- [02] eor x1, x4 ;1 [03] clr x2 ;1 [06] nop ;1 [05] rjmp didStuff7 ;1 [06] ;--------------------------------------------------------------------------- sendNakAndReti: ;- [-19] ldi x3, USBPID_NAK ;1 [-18] rjmp sendX3AndReti ;1 [-17] ;--------------------------------------------------------------------------- sendAckAndReti: ;- [-17] ldi cnt, USBPID_ACK ;1 [-16] sendCntAndReti: ;- [-16] mov x3, cnt ;1 [-15] sendX3AndReti: ;- [-15] ldi YL, 20 ;1 [-14] x3==r20 address is 20 ldi YH, 0 ;1 [-13] ldi cnt, 2 ;1 [-12] ; rjmp usbSendAndReti fallthrough ;--------------------------------------------------------------------------- ;usbSend: ;pointer to data in 'Y' ;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] ;uses: x1...x4, btcnt, shift, cnt, Y ;Numbers in brackets are time since first bit of sync pattern is sent ;We need not to match the transfer rate exactly because the spec demands ;only 1.5% precision anyway. usbSendAndReti: ;- [-13] 13 cycles until SOP in x2, USBDDR ;1 [-12] ori x2, USBMASK ;1 [-11] sbi USBOUT, USBMINUS ;2 [-09-10] prepare idle state; D+ and D- must have been 0 (no pullups) in x1, USBOUT ;1 [-08] port mirror for tx loop out USBDDR, x2 ;1 [-07] <- acquire bus ; need not init x2 (bitstuff history) because sync starts with 0 ldi x4, USBMASK ;1 [-06] exor mask ldi shift, 0x80 ;1 [-05] sync byte is first byte sent ldi bitcnt, 6 ;1 [-04] txBitLoop: ;- [-04] [06] sbrs shift, 0 ;1 [-03] [07] eor x1, x4 ;1 [-02] [08] ror shift ;1 [-01] [09] didStuffN: ;- [09] out USBOUT, x1 ;1 [00] [10] <-- out N ror x2 ;1 [01] cpi x2, 0xfc ;1 [02] brcc bitstuffN ;1 [03] dec bitcnt ;1 [04] brne txBitLoop ;1 [05] sbrs shift, 0 ;1 [06] eor x1, x4 ;1 [07] ror shift ;1 [08] didStuff6: ;- [08] nop ;1 [09] out USBOUT, x1 ;1 [00] [10] <-- out 6 ror x2 ;1 [01] cpi x2, 0xfc ;1 [02] brcc bitstuff6 ;1 [03] sbrs shift, 0 ;1 [04] eor x1, x4 ;1 [05] ror shift ;1 [06] ror x2 ;1 [07] didStuff7: ;- [07] ldi bitcnt, 6 ;1 [08] cpi x2, 0xfc ;1 [09] out USBOUT, x1 ;1 [00] [10] <-- out 7 brcc bitstuff7 ;1 [01] ld shift, y+ ;2 [02+03] dec cnt ;1 [04] brne txBitLoop ;1 [05] makeSE0: cbr x1, USBMASK ;1 [06] prepare SE0 [spec says EOP may be 19 to 23 cycles] lds x2, usbNewDeviceAddr;2 [07+08] lsl x2 ;1 [09] we compare with left shifted address ;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: ;set address only after data packet was sent, not after handshake out USBOUT, x1 ;1 [00] [10] <-- out SE0-- from now 2 bits==20 cycl. until bus idle subi YL, 20 + 2 ;1 [01] Only assign address on data packets, not ACK/NAK in x3 sbci YH, 0 ;1 [02] breq skipAddrAssign ;1 [03] sts usbDeviceAddr, x2 ;2 [04+05] if not skipped: SE0 is one cycle longer ;---------------------------------------------------------------------------- ;end of usbDeviceAddress transfer skipAddrAssign: ;- [03/04] ldi x2, 1<<USB_INTR_PENDING_BIT ;1 [05] int0 occurred during TX -- clear pending flag USB_STORE_PENDING(x2) ;1 [06] ori x1, USBIDLE ;1 [07] in x2, USBDDR ;1 [08] cbr x2, USBMASK ;1 [09] set both pins to input mov x3, x1 ;1 [10] cbr x3, USBMASK ;1 [11] configure no pullup on both pins ldi x4, 3 ;1 [12] se0Delay: ;- [12] [15] dec x4 ;1 [13] [16] brne se0Delay ;1 [14] [17] nop2 ;2 [18+19] out USBOUT, x1 ;1 [20] <--out J (idle) -- end of SE0 (EOP sig.) out USBDDR, x2 ;1 [21] <--release bus now out USBOUT, x3 ;1 [22] <--ensure no pull-up resistors are active rjmp doReturn ;1 [23] ;---------------------------------------------------------------------------
