diff -r b373b0288715 -r 770b218a4931 Configuration_mendel2.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Configuration_mendel2.h	Fri Nov 17 10:13:31 2017 +0100
@@ -0,0 +1,35 @@
+// Bed thermistor: Rapid 61-0446 ; Semitec 103GT-2 - All Mendel2 shipped after 1/4/13 (launch)
+// #define BED_BETA 4126.0
+// #define BED_NTC 10000.0
+
+// Bed thermistor: Farnell 1299930 ; EPCOS B57863S103F040 - All Mendel2 shipped after 29/5/14
+ #define BED_BETA 3988.0
+ #define BED_NTC 10000.0
+
+// Extruder thermistor: RS 198-961 100k ohm 10% DO-35 NTC thermistor - All Mendel2 shipped after 1/4/13 (launch)
+// #define E_BETA 3960.0
+// #define E_NTC 100000.0
+
+// Extruder thermistor: Digikey 480-3137-ND - All Mendels shipped after 25/2/14
+#define E_BETA 4138.0
+#define E_NTC 100000.0
+
+#define AXES_MAX_LENGTHS {210, 210, 140}
+#define INVERT_X_DIR true    // for Mendel set to false, for Orca set to true
+#define INVERT_Y_DIR false    // for Mendel set to true, for Orca set to false
+#define INVERT_Z_DIR false     // for Mendel set to false, for Orca set to true
+#define INVERT_E0_DIR true   // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E1_DIR true    // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E2_DIR true   // for direct drive extruder v9 set to true, for geared extruder set to false
+
+#define X_MAX_LENGTH 210  
+#define Y_MAX_LENGTH 210
+#define Z_MAX_LENGTH 110
+#define HOMING_FEEDRATE {10*60, 10*60, 1*60, 0}  // set the homing speeds (mm/min)
+#define FAST_HOME_FEEDRATE {50*60, 50*60, 1*60, 0}  // set the homing speeds (mm/min)
+
+#define DEFAULT_MAX_FEEDRATE          {300, 300, 3, 45}    // (mm/sec)    
+#define DEFAULT_MAX_ACCELERATION      {1000,1000,30,250}    // X, Y, Z, E maximum start speed for accelerated moves. E default values
+
+// X, Y, Z, E steps per mm
+#define DEFAULT_AXIS_STEPS_PER_UNIT    {92.635, 92.635, 4000, 660}   // <- 17-tooth printed pulley