--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Configuration_huxley.h Fri Nov 17 10:13:31 2017 +0100
@@ -0,0 +1,36 @@
+// Bed thermistor: VISHAY BC COMPONENTS NTCS0603E3104FXT - All Huxleys with heated bed PCB
+#define BED_BETA 4100.0
+#define BED_NTC 100000.0
+
+// Extruder thermistor: RS 198-961 100k ohm 10% DO-35 NTC thermistor - All Huxleys before 25/2/14
+// #define E_BETA 3960.0
+// #define E_NTC 100000.0
+
+// Extruder thermistor: Digikey 480-3137-ND - All Huxleys shipped after 25/2/14
+#define E_BETA 4138.0
+#define E_NTC 100000.0
+
+
+#define AXES_MAX_LENGTHS {155, 150, 90}
+#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
+#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
+#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
+#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
+
+
+#define X_MAX_LENGTH 155
+#define Y_MAX_LENGTH 150
+#define Z_MAX_LENGTH 90
+#define HOMING_FEEDRATE {10*60, 10*60, 1*60, 0} // set the homing speeds (mm/min)
+#define FAST_HOME_FEEDRATE {80*60, 80*60, 4*60, 0} // set the homing speeds (mm/min)
+#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec)
+#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec)
+#define DEFAULT_MAX_ACCELERATION {1000,1000,50,250} // X, Y, Z, E maximum start speed for accelerated moves. E default values
+
+// X, Y, Z, E steps per mm
+
+#define DEFAULT_AXIS_STEPS_PER_UNIT {87.489, 87.489, 4000, 660.0} // <- 18-tooth aluminium pulley
+//#define DEFAULT_AXIS_STEPS_PER_UNIT {92.635, 92.635, 4000, 660} // <- 17-tooth printed pulley
+//#define DEFAULT_AXIS_STEPS_PER_UNIT {91.4286, 91.4286, 4000, 920.0} // <- 14 tooth T2.5 belt + original extruder drive