comparison: Configuration_huxley.h
Configuration_huxley.h
- changeset 3
- 770b218a4931
equal
deleted
inserted
replaced
| 2:b373b0288715 | 3:770b218a4931 |
|---|---|
| 1 // Bed thermistor: VISHAY BC COMPONENTS NTCS0603E3104FXT - All Huxleys with heated bed PCB | |
| 2 #define BED_BETA 4100.0 | |
| 3 #define BED_NTC 100000.0 | |
| 4 | |
| 5 // Extruder thermistor: RS 198-961 100k ohm 10% DO-35 NTC thermistor - All Huxleys before 25/2/14 | |
| 6 // #define E_BETA 3960.0 | |
| 7 // #define E_NTC 100000.0 | |
| 8 | |
| 9 // Extruder thermistor: Digikey 480-3137-ND - All Huxleys shipped after 25/2/14 | |
| 10 #define E_BETA 4138.0 | |
| 11 #define E_NTC 100000.0 | |
| 12 | |
| 13 | |
| 14 #define AXES_MAX_LENGTHS {155, 150, 90} | |
| 15 #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true | |
| 16 #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false | |
| 17 #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true | |
| 18 #define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false | |
| 19 #define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false | |
| 20 #define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false | |
| 21 | |
| 22 | |
| 23 #define X_MAX_LENGTH 155 | |
| 24 #define Y_MAX_LENGTH 150 | |
| 25 #define Z_MAX_LENGTH 90 | |
| 26 #define HOMING_FEEDRATE {10*60, 10*60, 1*60, 0} // set the homing speeds (mm/min) | |
| 27 #define FAST_HOME_FEEDRATE {80*60, 80*60, 4*60, 0} // set the homing speeds (mm/min) | |
| 28 #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec) | |
| 29 #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec) | |
| 30 #define DEFAULT_MAX_ACCELERATION {1000,1000,50,250} // X, Y, Z, E maximum start speed for accelerated moves. E default values | |
| 31 | |
| 32 // X, Y, Z, E steps per mm | |
| 33 | |
| 34 #define DEFAULT_AXIS_STEPS_PER_UNIT {87.489, 87.489, 4000, 660.0} // <- 18-tooth aluminium pulley | |
| 35 //#define DEFAULT_AXIS_STEPS_PER_UNIT {92.635, 92.635, 4000, 660} // <- 17-tooth printed pulley | |
| 36 //#define DEFAULT_AXIS_STEPS_PER_UNIT {91.4286, 91.4286, 4000, 920.0} // <- 14 tooth T2.5 belt + original extruder drive |
