Mercurial > hg-public > Marlin / file comparison

comparison: sanguino/firmwares/arduino-usbserial/Descriptors.c

sanguino/firmwares/arduino-usbserial/Descriptors.c

changeset 2
b373b0288715
equal deleted inserted replaced
1:b584642d4f58 2:b373b0288715
1 /*
2 LUFA Library
3 Copyright (C) Dean Camera, 2010.
4
5 dean [at] fourwalledcubicle [dot] com
6 www.fourwalledcubicle.com
7 */
8
9 /*
10 Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
11
12 Permission to use, copy, modify, distribute, and sell this
13 software and its documentation for any purpose is hereby granted
14 without fee, provided that the above copyright notice appear in
15 all copies and that both that the copyright notice and this
16 permission notice and warranty disclaimer appear in supporting
17 documentation, and that the name of the author not be used in
18 advertising or publicity pertaining to distribution of the
19 software without specific, written prior permission.
20
21 The author disclaim all warranties with regard to this
22 software, including all implied warranties of merchantability
23 and fitness. In no event shall the author be liable for any
24 special, indirect or consequential damages or any damages
25 whatsoever resulting from loss of use, data or profits, whether
26 in an action of contract, negligence or other tortious action,
27 arising out of or in connection with the use or performance of
28 this software.
29 */
30
31 /** \file
32 *
33 * USB Device Descriptors, for library use when in USB device mode. Descriptors are special
34 * computer-readable structures which the host requests upon device enumeration, to determine
35 * the device's capabilities and functions.
36 */
37
38 #include "Descriptors.h"
39
40 /* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
41 * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
42 * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
43 * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
44 * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
45 * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
46 * port location).
47 */
48 #if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
49 #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
50 #endif
51
52 /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
53 * device characteristics, including the supported USB version, control endpoint size and the
54 * number of device configurations. The descriptor is read out by the USB host when the enumeration
55 * process begins.
56 */
57 USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
58 {
59 .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
60
61 .USBSpecification = VERSION_BCD(01.10),
62 .Class = 0x02,
63 .SubClass = 0x00,
64 .Protocol = 0x00,
65
66 .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
67
68 .VendorID = 0x03EB, // Atmel
69
70 .ProductID = 0x204B, // LUFA USB to Serial Demo Application
71 .ReleaseNumber = 0x0001,
72
73 .ManufacturerStrIndex = 0x01,
74 .ProductStrIndex = 0x02,
75 .SerialNumStrIndex = USE_INTERNAL_SERIAL,
76
77 .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
78 };
79
80 /** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
81 * of the device in one of its supported configurations, including information about any device interfaces
82 * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
83 * a configuration so that the host may correctly communicate with the USB device.
84 */
85 USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
86 {
87 .Config =
88 {
89 .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
90
91 .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
92 .TotalInterfaces = 2,
93
94 .ConfigurationNumber = 1,
95 .ConfigurationStrIndex = NO_DESCRIPTOR,
96
97 .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
98
99 .MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
100 },
101
102 .CDC_CCI_Interface =
103 {
104 .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
105
106 .InterfaceNumber = 0,
107 .AlternateSetting = 0,
108
109 .TotalEndpoints = 1,
110
111 .Class = 0x02,
112 .SubClass = 0x02,
113 .Protocol = 0x01,
114
115 .InterfaceStrIndex = NO_DESCRIPTOR
116 },
117
118 .CDC_Functional_IntHeader =
119 {
120 .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
121 .SubType = 0x00,
122
123 .Data = {0x01, 0x10}
124 },
125
126 .CDC_Functional_AbstractControlManagement =
127 {
128 .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
129 .SubType = 0x02,
130
131 .Data = {0x06}
132 },
133
134 .CDC_Functional_Union =
135 {
136 .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
137 .SubType = 0x06,
138
139 .Data = {0x00, 0x01}
140 },
141
142 .CDC_NotificationEndpoint =
143 {
144 .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
145
146 .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
147 .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
148 .EndpointSize = CDC_NOTIFICATION_EPSIZE,
149 .PollingIntervalMS = 0xFF
150 },
151
152 .CDC_DCI_Interface =
153 {
154 .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
155
156 .InterfaceNumber = 1,
157 .AlternateSetting = 0,
158
159 .TotalEndpoints = 2,
160
161 .Class = 0x0A,
162 .SubClass = 0x00,
163 .Protocol = 0x00,
164
165 .InterfaceStrIndex = NO_DESCRIPTOR
166 },
167
168 .CDC_DataOutEndpoint =
169 {
170 .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
171
172 .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
173 .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
174 .EndpointSize = CDC_TXRX_EPSIZE,
175 .PollingIntervalMS = 0x01
176 },
177
178 .CDC_DataInEndpoint =
179 {
180 .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
181
182 .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
183 .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
184 .EndpointSize = CDC_TXRX_EPSIZE,
185 .PollingIntervalMS = 0x01
186 }
187 };
188
189 /** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
190 * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
191 * via the language ID table available at USB.org what languages the device supports for its string descriptors.
192 */
193 USB_Descriptor_String_t PROGMEM LanguageString =
194 {
195 .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
196
197 .UnicodeString = {LANGUAGE_ID_ENG}
198 };
199
200 /** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
201 * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
202 * Descriptor.
203 */
204 USB_Descriptor_String_t PROGMEM ManufacturerString =
205 {
206 .Header = {.Size = USB_STRING_LEN(24), .Type = DTYPE_String},
207
208 .UnicodeString = L"Arduino (www.arduino.cc)"
209 };
210
211 /** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
212 * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
213 * Descriptor.
214 */
215 USB_Descriptor_String_t PROGMEM ProductString =
216 {
217 #if (ARDUINO_MODEL_PID == ARDUINO_UNO_PID)
218 .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
219
220 .UnicodeString = L"Arduino Uno"
221 #elif (ARDUINO_MODEL_PID == ARDUINO_MEGA2560_PID)
222 .Header = {.Size = USB_STRING_LEN(17), .Type = DTYPE_String},
223
224 .UnicodeString = L"Arduino Mega 2560"
225 #endif
226
227 };
228
229 /** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
230 * documentation) by the application code so that the address and size of a requested descriptor can be given
231 * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
232 * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
233 * USB host.
234 */
235 uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
236 const uint8_t wIndex,
237 void** const DescriptorAddress)
238 {
239 const uint8_t DescriptorType = (wValue >> 8);
240 const uint8_t DescriptorNumber = (wValue & 0xFF);
241
242 void* Address = NULL;
243 uint16_t Size = NO_DESCRIPTOR;
244
245 switch (DescriptorType)
246 {
247 case DTYPE_Device:
248 Address = (void*)&DeviceDescriptor;
249 Size = sizeof(USB_Descriptor_Device_t);
250 break;
251 case DTYPE_Configuration:
252 Address = (void*)&ConfigurationDescriptor;
253 Size = sizeof(USB_Descriptor_Configuration_t);
254 break;
255 case DTYPE_String:
256 switch (DescriptorNumber)
257 {
258 case 0x00:
259 Address = (void*)&LanguageString;
260 Size = pgm_read_byte(&LanguageString.Header.Size);
261 break;
262 case 0x01:
263 Address = (void*)&ManufacturerString;
264 Size = pgm_read_byte(&ManufacturerString.Header.Size);
265 break;
266 case 0x02:
267 Address = (void*)&ProductString;
268 Size = pgm_read_byte(&ProductString.Header.Size);
269 break;
270 }
271
272 break;
273 }
274
275 *DescriptorAddress = Address;
276 return Size;
277 }

Mercurial Repository: Marlin

mercurial