comparison: Marlin.ino
Marlin.ino
- changeset 3
- 770b218a4931
- parent 1
- b584642d4f58
equal
deleted
inserted
replaced
| 2:b373b0288715 | 3:770b218a4931 |
|---|---|
| 72 #include "EEPROMwrite.h" | 72 #include "EEPROMwrite.h" |
| 73 #include "language.h" | 73 #include "language.h" |
| 74 #include "pins_arduino.h" | 74 #include "pins_arduino.h" |
| 75 #include "slave_comms.h" | 75 #include "slave_comms.h" |
| 76 | 76 |
| 77 #define VERSION_STRING "1.0.2 RRP/NeoSoft" | 77 #define VERSION_STRING "1.0.2 RRP/NeoSoft\nModified for ERFH - Engraving Robot From Hell" |
| 78 | 78 |
| 79 // look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html | 79 // look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html |
| 80 // http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes | 80 // http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes |
| 81 | 81 |
| 82 //Implemented Codes | 82 //Implemented Codes |
| 1504 n571_enabled = (int)code_value(); | 1504 n571_enabled = (int)code_value(); |
| 1505 } | 1505 } |
| 1506 | 1506 |
| 1507 WRITE(M571_PIN, LOW);// M571 disable in any case! | 1507 WRITE(M571_PIN, LOW);// M571 disable in any case! |
| 1508 | 1508 |
| 1509 if (!(code_seen('S') || code_seen('E'))) { | |
| 1510 // only output to console when calles without parameters | |
| 1509 SERIAL_ECHO_START; | 1511 SERIAL_ECHO_START; |
| 1510 SERIAL_ECHO("Parameters: S<0|1> enable extruder active pin, E<0|1> if enabled prevent real drive movement"); | 1512 SERIAL_ECHO("Parameters: S<0|1> enable extruder active pin, E<0|1> if enabled prevent real drive movement"); |
| 1511 | 1513 |
| 1512 SERIAL_ECHO_START; | 1514 SERIAL_ECHO_START; |
| 1513 SERIAL_ECHO("Extruder active pin: "); | 1515 SERIAL_ECHO("Extruder active pin: "); |
| 1522 if (!n571_enabled) { | 1524 if (!n571_enabled) { |
| 1523 SERIAL_ECHOLN("enabled"); | 1525 SERIAL_ECHOLN("enabled"); |
| 1524 } else { | 1526 } else { |
| 1525 SERIAL_ECHOLN("disabled"); | 1527 SERIAL_ECHOLN("disabled"); |
| 1526 } | 1528 } |
| 1527 | 1529 } |
| 1528 break; | 1530 break; |
| 1529 | 1531 |
| 1530 | 1532 |
| 1531 | 1533 |
| 1532 } | 1534 } |
