comparison: language.h
language.h
- changeset 0
- 2c8ba1964db7
equal
deleted
inserted
replaced
| -1:000000000000 | 0:2c8ba1964db7 |
|---|---|
| 1 #ifndef LANGUAGE_H | |
| 2 #define LANGUAGE_H | |
| 3 | |
| 4 // Languages | |
| 5 // 1 Custom (For you to add your own messages) | |
| 6 // 2 English | |
| 7 // 3 French (Waiting translation) | |
| 8 // 4 German (Waiting translation) | |
| 9 // 5 Etc | |
| 10 | |
| 11 #define LANGUAGE_CHOICE 1 // Pick your language from the list above | |
| 12 | |
| 13 #if LANGUAGE_CHOICE == 1 | |
| 14 | |
| 15 // LCD Menu Messages | |
| 16 | |
| 17 #define WELCOME_MSG "Printer Ready." | |
| 18 #define MSG_STANDBY_TEMP "Standby temp set for: " | |
| 19 #define MSG_SD_INSERTED "Card inserted" | |
| 20 #define MSG_SD_REMOVED "Card removed" | |
| 21 #define MSG_MAIN " Main \003" | |
| 22 #define MSG_AUTOSTART " Autostart" | |
| 23 #define MSG_DISABLE_STEPPERS " Disable Steppers" | |
| 24 #define MSG_AUTO_HOME " Auto Home" | |
| 25 #define MSG_SET_ORIGIN " Set Origin" | |
| 26 #define MSG_COOLDOWN " Cooldown" | |
| 27 #define MSG_EXTRUDE " Extrude" | |
| 28 #define MSG_PREHEAT_PLA " Preheat PLA" | |
| 29 #define MSG_PREHEAT_ABS " Preheat ABS" | |
| 30 #define MSG_MOVE_AXIS " Move Axis \x7E" | |
| 31 #define MSG_SPEED " Speed:" | |
| 32 #define MSG_NOZZLE " \002Nozzle:" | |
| 33 #define MSG_BED " \002Bed:" | |
| 34 #define MSG_FAN_SPEED " Fan speed:" | |
| 35 #define MSG_FLOW " Flow:" | |
| 36 #define MSG_CONTROL " Control \003" | |
| 37 #define MSG_MIN " \002 Min:" | |
| 38 #define MSG_MAX " \002 Max:" | |
| 39 #define MSG_FACTOR " \002 Fact:" | |
| 40 #define MSG_AUTOTEMP " Autotemp:" | |
| 41 #define MSG_ON "On " | |
| 42 #define MSG_OFF "Off" | |
| 43 #define MSG_PID_P " PID-P: " | |
| 44 #define MSG_PID_I " PID-I: " | |
| 45 #define MSG_PID_D " PID-D: " | |
| 46 #define MSG_PID_C " PID-C: " | |
| 47 #define MSG_ACC " Acc:" | |
| 48 #define MSG_VXY_JERK " Vxy-jerk: " | |
| 49 #define MSG_VMAX " Vmax " | |
| 50 #define MSG_X "x:" | |
| 51 #define MSG_Y "y:" | |
| 52 #define MSG_Z "z:" | |
| 53 #define MSG_E "e:" | |
| 54 #define MSG_VMIN " Vmin:" | |
| 55 #define MSG_VTRAV_MIN " VTrav min:" | |
| 56 #define MSG_AMAX " Amax " | |
| 57 #define MSG_A_RETRACT " A-retract:" | |
| 58 #define MSG_XSTEPS " Xsteps/mm:" | |
| 59 #define MSG_YSTEPS " Ysteps/mm:" | |
| 60 #define MSG_ZSTEPS " Zsteps/mm:" | |
| 61 #define MSG_ESTEPS " Esteps/mm:" | |
| 62 #define MSG_MAIN_WIDE " Main \003" | |
| 63 #define MSG_TEMPERATURE_WIDE " Temperature \x7E" | |
| 64 #define MSG_MOTION_WIDE " Motion \x7E" | |
| 65 #define MSG_STORE_EPROM " Store memory" | |
| 66 #define MSG_LOAD_EPROM " Load memory" | |
| 67 #define MSG_RESTORE_FAILSAFE " Restore Failsafe" | |
| 68 #define MSG_REFRESH "\004Refresh" | |
| 69 #define MSG_WATCH " Watch \003" | |
| 70 #define MSG_PREPARE " Prepare \x7E" | |
| 71 #define MSG_PREPARE_ALT " Prepare \003" | |
| 72 #define MSG_CONTROL_ARROW " Control \x7E" | |
| 73 #define MSG_TUNE " Tune \x7E" | |
| 74 #define MSG_STOP_PRINT " Stop Print \x7E" | |
| 75 #define MSG_CARD_MENU " Card Menu \x7E" | |
| 76 #define MSG_NO_CARD " No Card" | |
| 77 #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure." | |
| 78 #define MSG_DWELL "Sleep..." | |
| 79 #define MSG_USERWAIT "Wait for user..." | |
| 80 #define MSG_NO_MOVE "No move." | |
| 81 #define MSG_PART_RELEASE "Partial Release" | |
| 82 #define MSG_KILLED "KILLED. " | |
| 83 #define MSG_STOPPED "STOPPED. " | |
| 84 #define MSG_PREHEAT_PLA " Preheat PLA" | |
| 85 #define MSG_PREHEAT_ABS " Preheat ABS" | |
| 86 #define MSG_STEPPER_RELEASED "Released." | |
| 87 | |
| 88 | |
| 89 // Serial Console Messages | |
| 90 | |
| 91 #define MSG_Enqueing "enqueing \"" | |
| 92 #define MSG_POWERUP "PowerUp" | |
| 93 #define MSG_EXTERNAL_RESET " External Reset" | |
| 94 #define MSG_BROWNOUT_RESET " Brown out Reset" | |
| 95 #define MSG_WATCHDOG_RESET " Watchdog Reset" | |
| 96 #define MSG_SOFTWARE_RESET " Software Reset" | |
| 97 #define MSG_MARLIN "Marlin " | |
| 98 #define MSG_AUTHOR " | Author: " | |
| 99 #define MSG_CONFIGURATION_VER " Last Updated: " | |
| 100 #define MSG_FREE_MEMORY " Free Memory: " | |
| 101 #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " | |
| 102 #define MSG_OK "ok" | |
| 103 #define MSG_FILE_SAVED "Done saving file." | |
| 104 #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" | |
| 105 #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" | |
| 106 #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" | |
| 107 #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" | |
| 108 #define MSG_FILE_PRINTED "Done printing file" | |
| 109 #define MSG_BEGIN_FILE_LIST "Begin file list" | |
| 110 #define MSG_END_FILE_LIST "End file list" | |
| 111 #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " | |
| 112 #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " | |
| 113 #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" | |
| 114 #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " | |
| 115 #define MSG_HEATING "Heating..." | |
| 116 #define MSG_HEATING_COMPLETE "Heating done." | |
| 117 #define MSG_BED_HEATING "Bed Heating." | |
| 118 #define MSG_BED_DONE "Bed done." | |
| 119 #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n" | |
| 120 #define MSG_COUNT_X " Count X:" | |
| 121 #define MSG_ERR_KILLED "Printer halted. kill() called !!" | |
| 122 #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)" | |
| 123 #define MSG_RESEND "Resend:" | |
| 124 #define MSG_UNKNOWN_COMMAND "Unknown command:\"" | |
| 125 #define MSG_ACTIVE_EXTRUDER "Active Extruder: " | |
| 126 #define MSG_INVALID_EXTRUDER "Invalid extruder" | |
| 127 #define MSG_X_MIN "x_min:" | |
| 128 #define MSG_X_MAX "x_max:" | |
| 129 #define MSG_Y_MIN "y_min:" | |
| 130 #define MSG_Y_MAX "y_max:" | |
| 131 #define MSG_Z_MIN "z_min:" | |
| 132 #define MSG_Z_MAX "z_max:" | |
| 133 | |
| 134 #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" | |
| 135 #define MSG_SD_INIT_FAIL "SD init fail" | |
| 136 #define MSG_SD_VOL_INIT_FAIL "volume.init failed" | |
| 137 #define MSG_SD_OPENROOT_FAIL "openRoot failed" | |
| 138 #define MSG_SD_CARD_OK "SD card ok" | |
| 139 #define MSG_SD_WORKDIR_FAIL "workDir open failed" | |
| 140 #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " | |
| 141 #define MSG_SD_FILE_OPENED "File opened:" | |
| 142 #define MSG_SD_SIZE " Size:" | |
| 143 #define MSG_SD_FILE_SELECTED "File selected" | |
| 144 #define MSG_SD_WRITE_TO_FILE "Writing to file: " | |
| 145 #define MSG_SD_PRINTING_BYTE "SD printing byte " | |
| 146 #define MSG_SD_NOT_PRINTING "Not SD printing" | |
| 147 #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" | |
| 148 #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" | |
| 149 | |
| 150 #define MSG_STEPPER_TO_HIGH "Steprate to high : " | |
| 151 #define MSG_ENDSTOPS_HIT "endstops hit: " | |
| 152 #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" | |
| 153 #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" | |
| 154 | |
| 155 #endif | |
| 156 #if LANGUAGE_CHOICE == 4 | |
| 157 | |
| 158 // LCD Menu Messages | |
| 159 | |
| 160 #define WELCOME_MSG "MARLIN Ready." | |
| 161 | |
| 162 #define MSG_SD_INSERTED "Card inserted" | |
| 163 #define MSG_SD_REMOVED "Card removed" | |
| 164 #define MSG_MAIN " Main \003" | |
| 165 #define MSG_AUTOSTART " Autostart" | |
| 166 #define MSG_DISABLE_STEPPERS " Stepper abschalten" | |
| 167 #define MSG_AUTO_HOME " Auto Heim" | |
| 168 #define MSG_SET_ORIGIN " Position setzen" | |
| 169 #define MSG_PREHEAT_PLA " Aufheizen PLA" | |
| 170 #define MSG_PREHEAT_ABS " Aufheizen ABS" | |
| 171 #define MSG_COOLDOWN " Abkuehlen" | |
| 172 #define MSG_EXTRUDE " Extrude" | |
| 173 #define MSG_PREHEAT_PLA " Preheat PLA" | |
| 174 #define MSG_PREHEAT_ABS " Preheat ABS" | |
| 175 #define MSG_MOVE_AXIS " Move Axis \x7E" | |
| 176 #define MSG_MOVE_AXIS " Achsen verfahren \x7E" | |
| 177 #define MSG_SPEED " Geschw:" | |
| 178 #define MSG_NOZZLE " \002Duese:" | |
| 179 #define MSG_BED " \002Bett:" | |
| 180 #define MSG_FAN_SPEED " Luefter geschw.:" | |
| 181 #define MSG_FLOW " Fluss:" | |
| 182 #define MSG_CONTROL " Kontrolle \003" | |
| 183 #define MSG_MIN " \002 Min:" | |
| 184 #define MSG_MAX " \002 Max:" | |
| 185 #define MSG_FACTOR " \002 Faktor:" | |
| 186 #define MSG_AUTOTEMP " AutoTemp:" | |
| 187 #define MSG_ON "Ein " | |
| 188 #define MSG_OFF "Aus " | |
| 189 #define MSG_PID_P " PID-P: " | |
| 190 #define MSG_PID_I " PID-I: " | |
| 191 #define MSG_PID_D " PID-D: " | |
| 192 #define MSG_PID_C " PID-C: " | |
| 193 #define MSG_ACC " Acc:" | |
| 194 #define MSG_VXY_JERK " Vxy-jerk: " | |
| 195 #define MSG_VMAX " Vmax " | |
| 196 #define MSG_X "x:" | |
| 197 #define MSG_Y "y:" | |
| 198 #define MSG_Z "z:" | |
| 199 #define MSG_E "e:" | |
| 200 #define MSG_VMIN " Vmin:" | |
| 201 #define MSG_VTRAV_MIN " VTrav min:" | |
| 202 #define MSG_AMAX " Amax " | |
| 203 #define MSG_A_RETRACT " A-retract:" | |
| 204 #define MSG_XSTEPS " Xsteps/mm:" | |
| 205 #define MSG_YSTEPS " Ysteps/mm:" | |
| 206 #define MSG_ZSTEPS " Zsteps/mm:" | |
| 207 #define MSG_ESTEPS " Esteps/mm:" | |
| 208 #define MSG_MAIN_WIDE " Main \003" | |
| 209 #define MSG_TEMPERATURE_WIDE " Temperatur \x7E" | |
| 210 #define MSG_MOTION_WIDE " Motion \x7E" | |
| 211 #define MSG_STORE_EPROM " EPROM speichern" | |
| 212 #define MSG_LOAD_EPROM " EPROM laden" | |
| 213 #define MSG_RESTORE_FAILSAFE " Standard Konfig." | |
| 214 #define MSG_REFRESH "\004Refresh" | |
| 215 #define MSG_WATCH " Beobachten \003" | |
| 216 #define MSG_PREPARE " Prepare \x7E" | |
| 217 #define MSG_PREPARE_ALT " Prepare \003" | |
| 218 #define MSG_CONTROL_ARROW " Control \x7E" | |
| 219 #define MSG_TUNE " Tune \x7E" | |
| 220 #define MSG_STOP_PRINT " Druck stoppen \x7E" | |
| 221 #define MSG_CARD_MENU " SDKarten Menue \x7E" | |
| 222 #define MSG_NO_CARD " Keine SDKarte" | |
| 223 #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur." | |
| 224 #define MSG_DWELL "DWELL..." | |
| 225 #define MSG_NO_MOVE "No move." | |
| 226 #define MSG_PART_RELEASE "Partial Release" | |
| 227 #define MSG_KILLED "KILLED. " | |
| 228 #define MSG_PREHEAT_PLA " Preheat PLA" | |
| 229 #define MSG_PREHEAT_ABS " Preheat ABS" | |
| 230 #define MSG_STEPPER_RELEASED "Released." | |
| 231 | |
| 232 | |
| 233 // Serial Console Messages | |
| 234 | |
| 235 #define MSG_Enqueing "enqueing \"" | |
| 236 #define MSG_POWERUP "PowerUp" | |
| 237 #define MSG_EXTERNAL_RESET " External Reset" | |
| 238 #define MSG_BROWNOUT_RESET " Brown out Reset" | |
| 239 #define MSG_WATCHDOG_RESET " Watchdog Reset" | |
| 240 #define MSG_SOFTWARE_RESET " Software Reset" | |
| 241 #define MSG_MARLIN "Marlin: " | |
| 242 #define MSG_AUTHOR " | Author: " | |
| 243 #define MSG_CONFIGURATION_VER " Last Updated: " | |
| 244 #define MSG_FREE_MEMORY " Free Memory: " | |
| 245 #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " | |
| 246 #define MSG_OK "ok" | |
| 247 #define MSG_FILE_SAVED "Done saving file." | |
| 248 #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" | |
| 249 #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" | |
| 250 #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" | |
| 251 #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" | |
| 252 #define MSG_FILE_PRINTED "Done printing file" | |
| 253 #define MSG_BEGIN_FILE_LIST "Begin file list" | |
| 254 #define MSG_END_FILE_LIST "End file list" | |
| 255 #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " | |
| 256 #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " | |
| 257 #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" | |
| 258 #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " | |
| 259 #define MSG_HEATING "Heating..." | |
| 260 #define MSG_HEATING_COMPLETE "Heating done." | |
| 261 #define MSG_BED_HEATING "Bed Heating." | |
| 262 #define MSG_BED_DONE "Bed done." | |
| 263 #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n" | |
| 264 #define MSG_COUNT_X " Count X:" | |
| 265 #define MSG_ERR_KILLED "Printer halted. kill() called !!" | |
| 266 #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" | |
| 267 #define MSG_RESEND "Resend:" | |
| 268 #define MSG_UNKNOWN_COMMAND "Unknown command:\"" | |
| 269 #define MSG_ACTIVE_EXTRUDER "Active Extruder: " | |
| 270 #define MSG_INVALID_EXTRUDER "Invalid extruder" | |
| 271 #define MSG_X_MIN "x_min:" | |
| 272 #define MSG_X_MAX "x_max:" | |
| 273 #define MSG_Y_MIN "y_min:" | |
| 274 #define MSG_Y_MAX "y_max:" | |
| 275 #define MSG_Z_MIN "z_min:" | |
| 276 #define MSG_Z_MAX "z_max:" | |
| 277 | |
| 278 #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" | |
| 279 #define MSG_SD_INIT_FAIL "SD init fail" | |
| 280 #define MSG_SD_VOL_INIT_FAIL "volume.init failed" | |
| 281 #define MSG_SD_OPENROOT_FAIL "openRoot failed" | |
| 282 #define MSG_SD_CARD_OK "SD card ok" | |
| 283 #define MSG_SD_WORKDIR_FAIL "workDir open failed" | |
| 284 #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " | |
| 285 #define MSG_SD_FILE_OPENED "File opened:" | |
| 286 #define MSG_SD_SIZE " Size:" | |
| 287 #define MSG_SD_FILE_SELECTED "File selected" | |
| 288 #define MSG_SD_WRITE_TO_FILE "Writing to file: " | |
| 289 #define MSG_SD_PRINTING_BYTE "SD printing byte " | |
| 290 #define MSG_SD_NOT_PRINTING "Not SD printing" | |
| 291 #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" | |
| 292 #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" | |
| 293 | |
| 294 #define MSG_STEPPER_TO_HIGH "Steprate to high : " | |
| 295 #define MSG_ENDSTOPS_HIT "endstops hit: " | |
| 296 #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" | |
| 297 #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" | |
| 298 | |
| 299 #endif | |
| 300 #endif // ifndef LANGUAGE_H |
